Freigeben über

WDS Capture tip

  • Artikel

As a support engineer at Microsoft, I know that some of you install Windows systems (prior to Windows Vista or Windows Server 2008) with a non default system root (remember, it's \Windows)
I will not discuss about this strategy even if this operations is useless :-) but let you know (if you're not already aware of) how to capture such systems !

In this case, when you use the WDS Capture image to capture a system, you won't find any partition to capture in the wizard.

By default the wdscapture.exe looks for a folder \Windows on the system drive to retrieve informations about the state of the system (i.e. sysprep'd or not).

If the system is not sysprep'd, no partition will be available for capture.

Same behavior if you installed the system under a non default folder (e.g. W2k3, W2k, ...).

image

To provide to wdscapture.exe the folder name of your installation, you have to modify the wdscapture.inf located in the \Windows\System32 of the WDS Capture wim file.

  1. Imagex /mountrw X:\RemoteInstall\boot\x86\Images\wdscapture.wim 1 E:\Mount

    X: represents the volume on which the WDS system folder is stored
    E:\Mount is a temporary empty folder used to mount the WIM file
    x86 represents the target architecture of the WDS Capture wim

  2. Edit the file e:\mount\Windows\System32\wdscapture.inf

  3. Modify the value of SystemRoot :

    SystemRoot=W2k3

  4. Close the file wdscapture.inf (save the changes !)

  5. Unmount the WDS Capture wim : Imagex /unmount E:\mount /commit

That's it !

Note that this procedure is provided "as is" with no warranty nor supportability engagement. It does not engage Microsoft at all.
Nevertheless if you consider this not clear, incomplete or inadequate, please let me know !

Comments

  • Anonymous
    January 01, 2003
    Can this WDSCapture.inf file be saved outside Captuer Image itself?  For example, on an ISO imaged to be presented as D: drive on the node to be captured ?

  • Anonymous
    December 03, 2009
    Thank you so much for this post!  I have spent 20 hours trying to capture an image and have tried everything I could think of - sysprepping over and over with different switches, injecting drivers, etc.  Nothing helped until I saw your post.  Once I changed the SystemRoot variable to the name our servers use, I got the C: drive in my "Volume to capture" screen.  You saved the day!!!