Freigeben über

Add SSL Security to your Azure Webrole

  • Artikel

As the new Azure toolkit allows upload of certificates to be associated with the roles, and multiple web roles, it is possible to set up 2 sites (2 webroles) one which would be secure, and one which would be unsecured.

The first thing you will need is some testing certificates on your local machine which you can generate with the steps found here:

https://msdn.microsoft.com/en-us/library/cc949011.aspx

I had a slight problem with step 5, as I could not directly put in “localmachine\my” certificate store from my command prompt, if you find this is an issue, change from

 makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=tempCert" -ic RootCATest.cer -sr localmachine -ss my -sky exchange -pe

to

 makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=tempCert" -ic RootCATest.cer -sr currentuser -ss my -sky exchange –pe

 

(changed on the –sr switch from localmachine to current user, and so you will find the certificate installed if you open MMC in Certificates – Current User, in the Personal Store, rather than in the Local Computer, Personal Store)

 mmcsnapin

Now you should have your certificates installed, and we can start a new azure project, remember that Visual Studio still needs to run in Administrator mode to run a cloud project.

I will add 2 asp.net web roles, one to add ssl security and the other to keep as standard (note this is for demo purposes, you can create a single webrole which it is possible to connect through http and https)

2webroles

Now you will have 2 default.aspx pages and if you run the cloud project at this time, as both are http, one will open on port 81 (as expected) and the other will open on port 8080.

To differentiate between the two, I am just going to add some text on the default.aspx pages one saying “Secure” and the other saying “Unsecure”.

Double clicking the SecureWebRole in the CloudService project will bring up the configuration of that webrole:

config

You can see from this that we have a HTTP endpoint, but the HTTPS endpoint is greyed out, as we have not yet configured a certificate for it to run with.

By selecting the certificates tab on the left and then clicking the Add Certificate button on the top of the section will allow you to set up a certificate to be used for SSL.

image

I will just leave the name as Certificate1 now, but I still need to configure it to use a certificate.  By clicking the ellipsis (…) button on thumbprint, this will allow you to select which certificate you wish to use from your certificate store.

selectCertificate

Choose the certificate you just created (probably tempCert unless you changed the CN=”tempCert” in the final command when generating certificates)

makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=tempCert" -ic RootCATest.cer -sr localmachine -ss my -sky exchange –pe

also note that IE will display a red bar across the address if this is not the domain name it will run in, and also prompt that there is a problem with the certificate.  To fix this, run the above command again with your machine name instead of tempCert.

Now we need to configure our endpoints for our web service, so click the Endpoints tab, here you will see why this webrole (assuming this is the correct webrole) ran under port 8080

 endpointcfg

 endpointcfgbig

As this is our secure webrole, I will untick http endpoint and tick HTTPS.

 endpointcfgbig1

this will set the https port (443) and the name automatically, but we still need to select which certificate we want to use, using the dropdown we can select the certificate we just created.

Saving this and running the cloud project will launch 2 instances of IE along with the Azure Development Environment.

One instance will have the unsecured (http) site:

 Running1

and our other on https showing the certificate error as I mentioned before.

 Running2.0

by clicking Continue to this website we are taken to the page we expected:

 Running2.1

What this is all doing behind the scenes is altering the csdef config file and cscfg to:

ServiceDefinition.csdef

 <?xml version="1.0" encoding="utf-8"?>
 <ServiceDefinition name="CloudService1" xmlns="https://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition">
   <WebRole name="WebRole">
     <InputEndpoints>
       <InputEndpoint name="HttpIn" protocol="http" port="80" />
     </InputEndpoints>
     <ConfigurationSettings>
       <Setting name="DiagnosticsConnectionString" />
     </ConfigurationSettings>
   </WebRole>
   <WebRole name="SecureWebRole">
     <ConfigurationSettings>
       <Setting name="DiagnosticsConnectionString" />
     </ConfigurationSettings>
     <Certificates>
       <Certificate name="Certificate1" storeLocation="LocalMachine" storeName="My" />
     </Certificates>
     <InputEndpoints>
       <InputEndpoint name="HttpsIn" protocol="https" port="443" certificate="Certificate1" />
     </InputEndpoints>
   </WebRole>
 </ServiceDefinition>

ServiceConfiguration.cscfg

 <?xml version="1.0"?>
 <ServiceConfiguration serviceName="CloudService1" xmlns="https://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
   <Role name="WebRole">
     <Instances count="1" />
     <ConfigurationSettings>
       <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" />
     </ConfigurationSettings>
   </Role>
   <Role name="SecureWebRole">
     <Instances count="1" />
     <ConfigurationSettings>
       <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" />
     </ConfigurationSettings>
     <Certificates>
       <Certificate name="Certificate1" thumbprint="170B0C2EB8C9E450D4B43272C184F47A47BE0534" thumbprintAlgorithm="sha1" />
     </Certificates>
   </Role>
 </ServiceConfiguration>

To deploy this to the cloud, first we are going to have to install our certificates to the cloud, otherwise we won’t be able to deploy the solution.  In the Azure portal when about to deploy the services we have a Certificates section:

deploy0

 

currently saying “No certificates found”.  Back in our MMC with the certificates snap-in still enabled, we can export the temp cert to a file by right clicking the certificate and clicking export.  Give it a password and a location and you will find a .pfx file containing the private certificate to put to the cloud.

 cloudcert1

type in the password you generated it with and click the upload button and shortly it will install the certificates:

 cloudcert2

now we can deploy the service as normal, by right clicking the project selecting publish, navigating through the azure portal, clicking deploy and selecting the cspkg and cscfg files the publish generated.

Given a couple of minutes for the roles to deploy and initialize we should see this within the cloud.

 deploy1

Comments

  • Anonymous
    January 31, 2010
    I have  create HTTPS endpoint for my Cloud application (using Self signed certificate). One of the requirements of my application is requirement of Client Certificate. I went through the Jim's new article 'Installing Certificates in Windows Azure VMs' & followed the steps (installed self signed & verisign certificates). The problem is when i try to access the WCF CloudService  (HTTPS + RequireCert) in IE, it just doesn't show the list of certificates to choose from. Same when i want to create a service reference of it. How does the local IE populates the digital client certificate list. When run locally the it displays all the client certificates from cert store to choose from. After deploying on the cloud it just went blank :(

  • Anonymous
    February 17, 2010
    Hi sharjeel, I believe that it is possible to do this if you are using WCF, as a client certificate can be specified in the WCF configuration.  Also you would be calling those services programatically or via a server (i.e. Biztalk), which will allow you to set up the client certificates. I believe I am right in saying that you would ideally like the IE popup similar to that when "Require Client Certificate" is chosen within IIS, which would not be accessable in the normal way when deploying to the cloud. Have you tried asking at the Azure forums? http://social.msdn.microsoft.com/forums/en-US/windowsazure/threads/ Hopefully that will provide the answer you are looking for. Thanks, Dave

  • Anonymous
    January 26, 2011
    Deployment from VS2010 is setting the OS Version in ServiceConfiguration.csfg to 1 (derived from Server 2008 SP2). Any WebRole coming with a certificate did not start. As it turned out a change of osFamily="1" to osFamily="2" is leading to an OS derived from Server 2008 R2. After that the SSL WebRole is starting like a charm.