Freigeben über

70-659 Cert Series - 1.1.1 Hyper-V Role-Identifying Hardware Requirements

  • Artikel

70-659 Certification Series - 1.1 Installing and Configuring Host and Parent Settings: Hyper-V Role

In this part of the 70-659 Certification Series we will go through the initial Installation/Setup and Configuration of Hyper-V…

1.1.1-Identifying Hardware Requirements

 

Silverlight is not installed or a later version is required.

 

Video: 5 minutes 29 seconds

Download Audio 70-659_Cert_Series-1.1.1_Hyper-V_Role-Identifying_Hardware_Requirements.mp3

Download Video 70-659_Cert_Series-1.1.1_Hyper-V_Role-Identifying_Hardware_Requirements.mp4

Requirements and Limits for Virtual Machines and Hyper-V in Windows Server 2008 R2

Minimum GUEST Requirements 

  • Windows Server 2008 and Windows Server 2008 R2
  • Windows Server 2003 SP2+ and Windows Server 2003 R2 SP2+
  • Windows 2000 Server SP4+
  • Windows Home Server 2011, Small Business Server 2001
  • Windows 7, Windows Vista and Windows XP SP2+ (support officially ended July 13, 2010)
  • CentOS 5.2+, Redhat 5.2+ and SUSE Linus Server 10 SP4+

See full list at: https://technet.microsoft.com/en-us/library/cc794868(WS.10).aspx

Maximum / Limits…

Virtual Machines (VM or Guest)

The following table lists the maximums that apply to each virtual machine.

Component Maximum Notes

Virtual processors

4

The number of virtual processors supported by a guest operating system might be lower. For more information, see About Virtual Machines and Guest Operating Systems.

Memory

64 GB

Review the requirements for the specific operating system to determine the minimum and recommended amounts.

Virtual IDE disks

4

The startup disk (sometimes referred to as the boot disk) must be attached to one of the IDE devices. The startup disk can be either a virtual hard disk or a physical disk attached directly to a virtual machine.

Virtual SCSI controllers

4

Use of virtual SCSI devices requires integration services to be installed in the guest operating system. For a list of the guest operating systems for which integration services are available, see About Virtual Machines and Guest Operating Systems

Virtual SCSI disks

256

Each SCSI controller supports up to 64 disks, which means that each virtual machine can be configured with as many as 256 virtual SCSI disks. (4 controllers x 64 disks per controller)

Virtual hard disk capacity

2040 GB

Each virtual hard disk is stored as a .vhd file on physical media. More on types of disks later!

Size of physical disks attached directly to a virtual machine

Varies

Maximum size is determined by the guest operating system.

Snapshots

50

The actual number may be lower, depending on the available storage. Each snapshot is stored as an .avhd file that consumes physical storage.

Virtual network adapters

12
  • 8 can be the “network adapter” type. This type provides better performance and requires a virtual machine driver that is included in the integration services packages.
  • 4 can be the “legacy network adapter” type. This type emulates a specific physical network adapter and supports the Pre-execution Boot Environment (PXE) to perform network-based installation of an operating system.

Virtual floppy devices

1 virtual floppy drive

None.

Serial (COM) ports

2

None.

Server running Hyper-V (HOST or Parent)

The following table lists the requirements and maximums that apply to the server running Hyper-V. In addition, we recommend that you review the Windows Catalog to identify servers that are qualified for use with Hyper-V. You can identify systems that support the x64 architecture and Hyper-V by searching the Windows Server catalog. For Windows Server 2008 you can select Hyper-V as an additional qualification (see https://go.microsoft.com/fwlink/?LinkId=111228). For Windows Server 2008 R2, all systems that have a "Certified for Windows® Server 2008 R2" logo support Hyper-V.

Component Maximum Notes

Logical processors

64

Both of the following must be available and enabled in the BIOS:

  • Hardware-assisted virtualization
  • Hardware-enforced Data Execution Prevention (DEP)

Virtual processors per logical processor

12 with conditions met in the ‘Notes’ column, otherwise 8.

A ratio of 12:1 is supported on Hyper-V in Windows Server 2008 R2 Service Pack 1 when all guest operating systems on the server run Windows 7. Otherwise, the supported ratio is 8:1.

Virtual machines per server

384 running virtual machines

None.

Virtual processors per server

512

None.

Memory

1 TB

None.

Storage

Limited by what is supported by the management operating system. No limits imposed by Hyper-V except NAS is not supported (see note) !

For more information about the storage options for Hyper-V, see Planning for Disks and Storage. For general information about storage for Windows Server, see Reviewing Storage Limits (https://go.microsoft.com/fwlink/?LinkID=161361).

noteNote
Microsoft does not support network-attached storage (NAS) for Hyper-V.
More on storage for the exam later!

Physical network adapters

No limits imposed by Hyper-V.

None.

Virtual networks (switches)

Varies; no limits imposed by Hyper-V.

The practical limit depends on the available computing resources.

Virtual network switch ports per server

Varies; no limits imposed by Hyper-V.

The practical limit depends on the available computing resources.

Failover Clusters and Hyper-V

The following table lists the maximums that apply to highly available servers running Hyper-V. It is important to do capacity planning to ensure that there will be enough hardware resources to run all the virtual machines in a clustered environment. For more information about requirements for failover clusters and Hyper-V, see Hyper-V: Using Hyper-V and Failover Clustering (https://go.microsoft.com/fwlink/?LinkID=129063).

Component Maximum Notes

Nodes per cluster

16

Consider the number of nodes you want to reserve for failover, as well as maintenance tasks such as applying updates. We recommend that you plan for enough resources to allow for 1 node to be reserved for failover, which means it remains idle until another node is failed over to it. (This is sometimes referred to as a passive node.) You can increase this number if you want to reserve additional nodes. There is no recommended ratio or multiplier of reserved nodes to active nodes; the only specific requirement is that the total number of nodes in a cluster cannot exceed the maximum of 16.

Running virtual machines per cluster and per node

1,000 per cluster, with a maximum of 384 on any one node

Several factors can affect the real number of virtual machines that can be run at the same time on one node, such as:

  • Amount of physical memory being used by each virtual machine.
  • Networking and storage bandwidth.
  • Number of disk spindles, which affects disk I/O performance.

More on Clusters for the exam later!

Video Embed Code: 
 <video style="width: 614px" id="myVideo2" class="pf-video" width="614" height="460" controls="controls" poster="https://itproguru.net/wp-content/uploads/2012/01/DanStoltsITProGuru-Video.png"><source src="https://itproguru.net/wp-content/uploads/2012/01/70-659_Cert_Series-1.1.1_Hyper-V_Role-Identifying_Hardware_Requirements.mp4" type="video/mp4; codecs=&quot;avc1.42E01E, mp4a.40.2&quot;" /><object class="pf-silverlight" data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="480" height="320" data-poster="wp-content/uploads/2012/01/DanStoltsITProGuru-Video.png">        <div class="pf-static">             Silverlight is not installed or a later version is required.        </div></object></video>

The Entire Series Can be Found at: 70-659 Microsoft Server Virtualization Certification Everything You Need To Know to PASS! Blog Post Series