Freigeben über

ExFolders for Exchange 2010 Sp1

  • Artikel

A few of you emailed me when you noticed an error running ExFolders on Exchange 2010 SP1, which was recently released. Attempting to navigate into a mailbox would throw an error stating, “Error: Method not found.” This was due to some changes in the DLLs that ExFolders relies on.

We’ve just posted a new version of ExFolders that works properly with Sp1. You can find it here.

The RTM version is still available for download as well. Be aware that the RTM version won’t work on Sp1, and the Sp1 version won’t work on RTM, as far as navigating into mailboxes.

Comments

  • Anonymous
    January 01, 2003
    Reggie, on the Details tab of the properties page of ExFolders.exe, what is the build number?

  • Anonymous
    January 01, 2003
    Hi Michael,

    I don't understand how that is happening on SP3 RU5. In my lab it seems to work. It would take some troubleshooting to figure out what's going on.

    Can you share what the scenario is that you want to solve with the tool? I'm working on replacing ExFolders with a new tool that is easier to support, and I want to make sure the most common scenarios are covered.

  • Anonymous
    January 01, 2003
    David, what are the exact steps that lead to the error? Are you saying it happens when you right-click and choose Recover Folder? If so, please download the Procdump tool. Launch ExFolders and then run procdump as follows: procdump -e -ma exfolders.exe At that point, reproduce the error, and procdump should generate a dump file. Use the "Email Blog Author" link at the top right of this page to let me know you have the dump file.

  • Anonymous
    January 01, 2003
    Hi Michael,

    I've just added this functionality to the MAPIFolders tool. Please see: https://mapifolders.codeplex.com/workitem/6 The example syntax I show there exports the ptagFID property, which is what you want.

    Also, be sure to read the requirements: https://mapifolders.codeplex.com/wikipage?title=Using%20MAPIFolders

    If you have any problem with it, please post there. Thank you!

  • Anonymous
    January 01, 2003
    Panos, this is a little late, but the link is up in the post where it says "you can find it here." Click on "here". :)

  • Anonymous
    January 01, 2003
    Switchgott, if your Exchange version is showing as 14.00, you are not on Sp1. If you were, it would be 14.01.

  • Anonymous
    January 01, 2003
    Hi all, I installed today the Exfolder+SP1 and later on an Exch 2010 SP1 but i receive this messge when i try to connect to a mailbox : "Method not found: 'Microsoft.Exchange.Data.Storage.ExchangePrincipal Microsoft.Exchange.Data.Storage.ExchangePrincipal.FromLegacyDN(System.String, Boolean)'" Any Idea

  • Anonymous
    January 01, 2003
    Please make sure you're using the correct version. That error should only occur if you're running the Sp1 build on an RTM server, or the RTM build on an Sp1 server.

  • Anonymous
    January 01, 2003
    Hein, that is probably due to a bug in ExFolders that I have been trying to fix. I hope to have an updated version soon.

  • Anonymous
    January 01, 2003
    Hey Doug, I haven't heard of that. Are you sure the stack trace is non-specific? That might show me where it's failing.

  • Anonymous
    January 01, 2003
    Hein, that issue is fixed in the latest build which is now available at the usual link.

  • Anonymous
    October 20, 2010
    Bill, I am using Exchange 2010 SP1 and the SP1 version of exFolders and I am still getting the "method not found error"... any help would be greatly appreciated.

  • Anonymous
    December 23, 2010
    Receiving the below when clicking on user and attempting expand his/her properties. EX2010 with SP1 Method not found: 'Microsoft.Exchange.Data.Storage.ExchangePrincipal Microsoft.Exchange.Data.Storage.ExchangePrincipal.FromLegacyDN(System.String, Boolean)'.

  • Anonymous
    February 22, 2011
    Does this tool work with Exchange 2010 SP2?  I have read the readme, ran the reg file but app just crashes when I try to run.

  • Anonymous
    February 22, 2011
    Trying to run ExFolders.exe from C:Program FilesMicrosoftExchange ServerV14Bin

  • Anonymous
    February 22, 2011
    Sorry It is SP1, was looking at the wrong label.  Can't get it to run though

  • Anonymous
    March 16, 2011
    The comment has been removed

  • Anonymous
    May 23, 2011
    Did anybody ever get this to work? I am still getting the same Error: Method not found. I am running Exchnage Server 2010 version 14.01.0289.001 on Windows Server 2008 R2 Standard...I downloaded and extracted the version of EXFolders above...it says ver. 2.8....what am I doing wrong?

  • Anonymous
    July 20, 2011
    Hi, i got the same problem on exchange 2010 Sp1. Error:Method not found. Exchange Version 14.00.0722.000

  • Anonymous
    October 14, 2011
    Not working. I get a message saying application has stopped working. Nothing. I need a folder recovered it is there but no-one has permission not even the person who deleted it.

  • Anonymous
    December 15, 2011
    Correct. Had the same symptoms and this new version solved my problems. Thank you

  • Anonymous
    May 31, 2012
    I get ExFolder SP1 running on my Exchabge Sp1 server but i get the message "Error: Cannot open maibox etc etc" Running ExFolders as Admin. Anybody got a hint as to why my ExFolders is not cooperating?

  • Anonymous
    August 19, 2013
    Running Exchange 2010 SP3 w/ rollup 1. Exfolders gives "Logged on user does not have FullAccess to this mailbox". I've verified that the user I'm logged in as does in fact have full access. I also am able to modify permissions using Powershell as the same user. Any idea?

  • Anonymous
    December 12, 2013
    Hello, I'm trying to use ExFodlers on Exchange 2010 SP3. Regarding Publics Folders, all is running fine .. but for mailbox, I can't see subfolders. My admin account is granted full mailbox access, I can find it on the database, but when I expand the mailbox (using the + ) .. nothing  happens, the windows stay blanck. Any ideas ?

  • Anonymous
    April 30, 2014
    hey Bill, I've had this working in the past on E2K10 SP3 using the latest code, however we have recently upgraded our AD to W2K12 R2. Have you heard of people having issues at that level? Popup error we receive is 'ExFolders could not be initialized. Exception: There is no such object on the server' and then some non-specific stack trace info. any ideas? account being used has full perms. thanks! Doug

  • Anonymous
    May 19, 2014
    Hi,
    I've download the version of the product here: http://gallery.technet.microsoft.com/Exchange-2010-SP1-ExFolders-e6bfd405
    When I launch ExFolders, I can connect to a mailboxes databases, it display the mailboxes list, but if I want to expand one mailboxe I've the error (in french):
    Error: Méthode introuvable : 'Microsoft.Exchange.data.Storage.ExchangePrincipal Microsoft.Exchange.Data.Storage.ExchangePrincipal.FromLegacyDN(System.String, Microsoft.Exchange.Data.Storage.RemotingOptions)'.
    The System is under Windows 2008 R2 Enterprise SP1 (French)
    Exchange have SP3 and Update Rollup 5

  • Anonymous
    May 19, 2014
    We try to solved same Warning like as this post: http://social.technet.microsoft.com/Forums/exchange/en-US/10577c97-989d-4503-9383-0af1f3778c9d/event-id-9875-appearing