Freigeben über

"One or more ActiveX controls could not be displayed" error when you open MMC “Extended” tab

  • Artikel

Symptom:

=========

When you start MMC console like services.msc or gpedit.msc, you will get the following error message:

One or more ActiveX controls could not be displayed because either: 1) Your current security settings prohibit running ActiveX controls on this page, or 2) You have blocked a publisher of one of the controls. As a result, the page may not display correctly.

When you click OK in the error message, you receive the same error message again.

 

Another symptom is that Desktop sidebar gadgets stop working and just show as black squares with a green vertical line down the center.

 

Solution:

=========

Method 1:

1.

Click Start , click Run , type regedit , and then click OK .

2.

Expand the following registry subkey:

HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet SettingsZones�

3.

In the right pane, right-click 1200 , and then click Modify .

4.

In the Value data box, type either 1 or 0 to overwrite the existing value of 3. Then, click OK .

Note If you type 1 in the Value data box, you will receive the following prompt when you start Microsoft Project:

Do you want to allow software such as ActiveX controls and plug-ins to run?

Additionally, you will receive this prompt at other times when you use Microsoft Project. If you do not want to receive this prompt, type 0 in the Value data box.

The values 0, 1, and 3 are associated with the following behavior:

•

0 = Enabled, or the action is permitted

•

1 = Prompt

•

3 = Disabled, or the action is not permitted

5.

Quit Registry Editor.

Method 2:

 

If the issue still exists, please follow the following method:

1.       Click Start , click Run , type regedit , and then click OK .

2.       Expand the following registry subkey:

HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet SettingsZones

3.       Delete 1 extra (parasite) zone from

HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet SettingsZones

with pseudo-graphic number, you'll see it before zone number 0. The pseudo-graphic number they speak of before zone number 0 looks like a miniature upper case "L".

Edit: We published a KB article for it, you can use "FixIt" tool to fix the problem in one click:

http://support.microsoft.com/kb/2506343/en-us

Comments

  • Anonymous
    January 01, 2003
    Method 2 fixed me too. But looks like a NOT miniature upper case "L" BUT LIKE A SIMPLE SQUARE.

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    January 26, 2011
    Thanks, Method 2 fixed it! Any idea what was causing this? Maybe becasue I installed the leaked bits of Windows 7 SP1 x86 'RTM' ???

  • Anonymous
    January 27, 2011
    thanks - method 2 fixed me too.  would like to know what caused that.

  • Anonymous
    February 09, 2011
    but  I use this method , didn't resolve my problem, my mail address is lifeng2620155@hotmail.com

  • Anonymous
    February 20, 2011
    I can use the method 2 to fix the problem.

  • Anonymous
    February 25, 2011
    Thanks, method 2 fixed the problem.

  • Anonymous
    March 06, 2011
    I found a forum that thought Adobe update inserted a registry item just above the 1 in the fixes listed above.  It looks like an L.  I deleted this item and the problem was fixed.

  • Anonymous
    March 28, 2011
    it work! thanks a bunch!!! =)

  • Anonymous
    April 25, 2011
    YEAH THANKS FOR SOL.2 ITS WORKS U ROCKS

  • Anonymous
    April 28, 2011
    Thank you very much!!!! Method2 fixed the problem.:)

  • Anonymous
    June 09, 2011
    Thanks you so much, Method 2, has fixed the problem. error "One or more ActiveX controls could not be displayed because either: 1) Your current security settings prohibit running ActiveX controls on this page, or 2) You have blocked a publisher of one of the controls. As a result, the page may not display correctly". Error appears while:-

  1. Scanning document through "HP Printer".
  2. while opening "services.msc".

  • Anonymous
    June 23, 2011
    Thanks fo much, Method 2 fixed my problem too.

  • Anonymous
    June 25, 2011
    Thanks hundreds and hundreds of times, for i spent hundreds of days for it,  ahsan_th32@yahoo.com

  • Anonymous
    June 28, 2011
    thanks a lot !!! method 2 works

  • Anonymous
    July 03, 2011
    TQ Very 99 times for this solution man

  • Anonymous
    July 13, 2011
    Thanks for the post it really help..

  • Anonymous
    July 14, 2011
    Method 2 is working >> Thaaaaaaanks

  • Anonymous
    July 27, 2011
    yyyyyyyyyyyyeeeeeeeeeeepppppppppppppp Method 2 is the SOLVER.

  • Anonymous
    July 27, 2011
    Hi, I have faced the same issue.It has resolved now.Followed the procedure given on below links - support.microsoft.com/.../2506343 am-techzone.blogspot.com/.../one-or-more-activex-controls-could-not.html

  • Anonymous
    July 28, 2011
    Thanks for the valuable information. Faced the same issue at my end.Followed the steps given on above link. am-techzone.blogspot.com/.../one-or-more-activex-controls-could-not.html

  • Anonymous
    July 29, 2011
    The comment has been removed

  • Anonymous
    August 02, 2011
    thanks. Method 2 solved fixed my problem too..:)

  • Anonymous
    August 07, 2011
    Thanks !!!! Method 2 fixed my problem. I've been looking for this solution a really long time.

  • Anonymous
    August 07, 2011
    Thaks Dear method 2 worked. Love you. tariq.ilyas96@gmail.com

  • Anonymous
    August 15, 2011
    Thanks a lot. The method 2 did it for me.

  • Anonymous
    September 12, 2011
    Method 2 fixed me as well. I was having problems with Karspersky Lab administration kit Console. Method 2 for real

  • Anonymous
    September 19, 2011
    Solution 2 Worked .. Thanks a lot

  • Anonymous
    October 09, 2011
    After 5 hours of trying to resolve this problem. the only one that worked is (Microsoft Fix it 50618). you just need to download it and it will do the work

  • Anonymous
    December 05, 2011
    The second method fix the problem to me...  In my case I have delete an "small square" previous the Zone 0.

  • Anonymous
    January 25, 2012
    none of these "solutions" works for me

  • Anonymous
    February 08, 2012
    method 2 it works, thanks a lot man

  • Anonymous
    April 29, 2012
    it didnt work for me, no extra zones or value "3" in the name 1200 file. any other ideas please? also windows live mail dont work any more, win7 is the worse of all version of windows

  • Anonymous
    November 12, 2012
    I had the same problem, and these methods did NOT help. I discovered by changing the font color (from blue to dark blue) erradicated that annoying error.

  • Anonymous
    November 22, 2012
    Sorry, but  there is not pseudo-graphic number  before zone number 0. What to do ???? Thank you!

  • Anonymous
    March 19, 2013
    I had an online computer geek try to fix this for me and they couldn't do it. followed your no. 2 instructions and fixed the problem. thanks so much.