Freigeben über

Lab guide: Step-by-Step - Building a Web Service backed by a REDIS cache and MySQL Database on Kubernetes

  • Artikel
  • This is a step-by-step lab that will guide you to building out a web service that runs on Kubernetes.
  • The technologies for the web service includes Python and Flask.
  • A REDIS caching layer is employed in addition to a MySQL database

Video Presentations of this lab can be found here:

https://www.youtube.com/channel/UCsBCIVK2c\_YqxRQFX6xfYJw/videos?shelf\_id=0\&view=0\&sort=dd

You can see in the diagram below that VM is represented by an agent, both agent 1 and agent 2. Notice further that on each agent a pod is running.

The first pod is running both the web service, represented by Python and flask, as well as the caching service (REDIS). It makes sense to bundle those two together on the same pod so as to minimize latency.

The caching service saves round-trips to the database. if the data is in the cache, then the database does not need to get involved.

Notice that the user will come in on Port 80 when accessing the web service from the outside world. But the actual requests get routed to port 5000 in the Python flask web service, which is listening really on port 5000.

kubernetes100

Figure 1: Overview

Part 1 - Introduction

Let's recap the technology stack used in these labs:

This service will have some core characteristics.

  • The application will run in the Azure Container Service (ACS) as a K8s cluster
  • ACS + Kubernetes will host a web service (Python + Flask)
  • There is:
    • A caching layer (Redis)
    • A backend database of MySQL
    • Two pods
      • The first pod will have both the web service and the caching layer
      • The second pod will have a MySQL database

Prerequisites

Before getting started, make sure that you have a Kubernetes cluster created. You will also need to verify that the kubectl utility works correctly. You will need to download the config file, which is what allows the kubectl to properly connect up to the Kubernetes cluster.

You will not need to specifically SSH into the Kubernetes cluster. But you will need a development machine that has the appropriate SSH keys that allows communication with the Kubernetes cluster.

I have created a couple of videos to illustrate how to get that set up. There is some overlap in these videos, but taken together they show you how to install all the necessary tooling to get up and running, even provisioning the cluster itself within Azure.

Video 1 Click Here
Video 2 Click Here

Test your knowledge

Do you know what a Kubernetes pod is?

**Pod: ** A pod (as in a pod of whales or pea pod) is a group of one or more containers (such as Docker containers), the shared storage for those containers, and options about how to run the containers.

Pods are always co-located and co-scheduled, and run in a shared context.

A pod models an application-specific “logical host” - it contains one or more application containers which are relatively tightly coupled — in a pre-container world, they would have executed on the same physical or virtual machine.

While Kubernetes supports more container runtimes than just Docker, Docker is the most commonly known runtime, and it helps to describe pods in Docker terms.

The shared context of a pod is a set of Linux namespaces, cgroups, and potentially other facets of isolation - the same things that isolate a Docker container. Within a pod’s context, the individual applications may have further sub-isolations applied.

Containers within a pod share an IP address and port space, and can find each other via localhost. They can also communicate with each other using standard inter-process communications like SystemV semaphores or POSIX shared memory. Containers in different pods have distinct IP addresses and can not communicate by IPC.

Part 2 - Getting the code

The prerequisite to this session is the fact that you have a Kubernetes cluster already provisioned.

There are numerous videos around this lab here: Click Here

Downloading the source code

You can download all the source code here: Click Here

Lab Instructions

  1. Download the source code for this lab.

The command download is:

 git clone https://github.com/brunoterkaly/k8s-multi-container.git

Here is the output:

kubernetes0004

Figure 2: Cloning the source code

You will notice that there are three folders:

  • Build (contains the Python code to build out our web service)
  • Deploy (Contains the YML definition file that lets us set up our pods, services, and our containers in Kubernetes)
  • Run (contains the commands to deploy, operate, and manage our Kubernetes cluster)

Below you will find the folder structure that was addressed above.

kubernetes0003

Figure 3: The files and folders used in this lab

Part 3 - Building the web service

In this section we will focus on building out the web service, focusing on the Python code. We will also build out the docker image that will run in the agents of the Kubernetes cluster. We will review the Python file, Flask and some other pieces.

  • The web service is a combination of Python and Flask
  • Python represents the main programming paradigm and Flask as the necessary libraries to expose endpoints as web services
  • dockerfile is used to build out our image, which will then be uploaded to hub.docker.com
  • app.py represents the Python application that implements web services
  • buildpush.sh is some script code to do both the building of the image, as well as the uploading of the image to hub.docker.com

Test your knowledge

Do you know what Flask is?

Flask is a web framework. This means flask provides you with tools, libraries and technologies that allow you to build a web application. This web application can be some web pages, a blog, a wiki or go as big as a web-based calendar application or a commercial website.

Flask is part of the categories of the micro-framework. Micro-framework are normally framework with little to no dependencies to external libraries. This has pros and cons. Pros would be that the framework is light, there are little dependency to update and watch for security bugs, cons is that some time you will have to do more work by yourself or increase yourself the list of dependencies by adding plugins.

The Python application is a web service that listens on port 5000.a number of URLs with differing endpoints will map to specific methods within the app.py file.

kubernetes0006

Figure 4: Working on the Python App

Test your knowledge

Do you know what a Dockerfile is?

**Dockerfile: ** Docker can build images automatically by reading the instructions from a Dockerfile. A Dockerfile is a text document that contains all the commands a user could call on the command line to assemble an image. Using docker build users can create an automated build that executes several command-line instructions in succession

The Dockerfile

Before diving into the details of the app.py, let's talk about the environment in which it will run.

It all wrong inside of a docker container. Docker containers is the execution of a docker image.

  • Represents the image blueprint for our docker container
  • Listening on port 5000
  • Starts up running app.py

Dockerfile

 FROM python:2.7-onbuild
EXPOSE 5000
CMD [ "python", "app.py" ]

Notice of the docker file above that FROM python:2.7-onbuild represents the base image that comes preconfigured with all the Python dependencies that are needed. That is the beauty of the docker ecosystem. You can start with an existing Python image that has flask installed.

There are a few things to notice: - Port 5000 was exposed for the container so that incoming requests can be serviced - CMD [ "python", "app.py" ] tells the system to run the ap.py file when the container starts.

Lab Instructions

  1. Go to the Build directory
  2. Open Dockerfile
  3. Make sure that you understand the contents of the Dockerfile

Type these commands:

 cd Build
vim Dockerfile

app.py represents the main web service. It imports a variety of libraries. Let's present the code then review it.

Lab Instructions

Here is how to view app.py.

  1. Go to the Build directory

  2. Open Dockerfile

  3. Make sure that you understand the contents of the app.py

    cd Build vim app.py

Test your knowledge

Do you know what a Flask route is?

**Flask Route: ** As you wil see below, the route() decorator is used to bind a function to a URL. Here is a basic examples:

 @app.route('/hello')
def hello():
 return 'Hello, World'

Notice that our example below for Flask has many more routes:

app.py

 from flask import Flask
from flask import Response
from flask import request
from redis import Redis
from datetime import datetime
import MySQLdb
import sys
import redis 
import time
import hashlib
import os
import json

app = Flask(__name__)
startTime = datetime.now()
R_SERVER = redis.Redis(host=os.environ.get('REDIS_HOST', 'redis'), port=6379)
db = MySQLdb.connect("mysql","root","password")
cursor = db.cursor()

@app.route('/init')
def init():
    cursor.execute("DROP DATABASE IF EXISTS AZUREDB")
    cursor.execute("CREATE DATABASE AZUREDB")
    cursor.execute("USE AZUREDB")
    sql = """CREATE TABLE courses(id INT, coursenumber varchar(48), 
                  coursetitle varchar(256), notes varchar(256));  
     """
    cursor.execute(sql)
    db.commit()
    return "DB Initialization done\n" 

@app.route("/courses/add", methods=['POST'])
def add_courses():

    req_json = request.get_json()   
    cursor.execute("INSERT INTO courses (id, coursenumber, coursetitle, notes) VALUES (%s,%s,%s,%s)", 
          (req_json['uid'], req_json['coursenumber'], req_json['coursetitle'], req_json['notes']))
    db.commit()
    return Response("Added", status=200, mimetype='application/json')

@app.route('/courses/<uid>')
def get_courses(uid):
    hash = hashlib.sha224(str(uid)).hexdigest()
    key = "sql_cache:" + hash

    returnval = ""
    if (R_SERVER.get(key)):
        return R_SERVER.get(key) + "(from cache)" 
    else:
        cursor.execute("select coursenumber, coursetitle, notes from courses where ID=" + str(uid))
        data = cursor.fetchall()
        if data:
            R_SERVER.set(key,data)
            R_SERVER.expire(key, 36)
            return R_SERVER.get(key) + "\nSuccess\n"
        else:
            return "Record not found"

if __name__ == "__main__":
    app.run(host="0.0.0.0", port=5000, debug=True)

Understanding app.py

There are 3 endpoints that the web service responds to: - https://[Kubernetes Cluster IP Address]/init - https://[Kubernetes Cluster IP Address]/add - https://[Kubernetes Cluster IP Address]/courses/{course id} - The user passes in the {course id}

The code is self explanatory, but here are some high level tips.

Expose the "init" endpoint - The user will hit https://[Kubernetes Cluster IP Address]/init - The result is to setup the database (create database, tables, etc) - Initially, we will use an internal IP address, later moving to a public IP address

Expose the "add" endpoint - The user will hit https://[Kubernetes Cluster IP Address]/courses/add - Performs an insert into the database using the data posted by the user - POST is the HTTP verb being used

Expose the "courses/{course id}" endpoint - The user will hit https://[Kubernetes Cluster IP Address]/courses/ {course id} - This allows the user to query the endpoint - It will return records from either the cache or the database - If the data is not in the cache, it will be retrieved from the database, put into the cache, and returned to the client

Lab Instructions

Let's build the Docker image and upload to hub.docker.com.

  1. Go to hub.docker.com and establish an account. You will need it to upload docker images. The account used in these demos is brunoterkaly. See "Example Account" below.
  2. Go to the Build directory
  3. Open buildpush.sh
    1. This is a shell script that builds the docker image and pushes image to hub.docker.com
  4. Make sure that you understand the contents of the buildpush.sh
  5. Run buildpush.sh

Commands to view and run buildpush.sh

 # View buildpush.sh
cd Build
vim buildpush.sh
# Run buildpush.sh
bash buildpush.sh

Remember to go to hub.docker.com and create your own account. As you can see, I chose "brunoterkaly" as the owner of my repos on hub.docker.com.

So you will then edit "brunoterkaly" below to reflect YOUR hub.docker.com account.

buildpush.sh

 # Make sure to run as "root" or use "sudo"
# Don't forget "brunoterkaly" will not work for you
# Use the one you created at hub.docker.com
sudo docker build . -t brunoterkaly/py-red
# You may need to do a "docker login" command for the command below to work
sudo docker push brunoterkaly/py-red

Run buildpush.sh

 bash buildpush.sh

kubernetes0007

Figure 5: Example Account

Output of buildpush.sh

kubernetes0008

Figure 6: Example of running buildpush.sh

You should be able to see the the image available on hub.docker.com.

kubernetes0009

Figure 7: hub.docker.com - Our image is ready for download

Part 4 - Understanding the YAML files

Kubernetes uses a declarative markup language inside of YAML file to define the way containers run inside of pods as well as how these containers are exposed to the outside world through a service layer, which exposes either private or public IP address. There will be three categories of the YAML files. The first while YAML file will define a pod in which the both the Python application as well as the REDIS cache. The second YAML file is used to define how the MySQL database will run in its own pod. And the third YAML file will be used to expose the endpoint in the Python web service with either private or public IP address.

Before you get here, make sure you have issued the "docker build" and "docker push" commands reflected above.

Here is some information about pods and containers. Some of this reiterates what was just said above.

  • These YAML files define the way our containers will run in the Kubernetes cluster
  • They also define how the containers are organized within pods
  • Pods group together containers in the same host
  • This provides efficiency in that the containers are running close together
  • As described, there are two pods
  • On the first pod there will be two containers, the Python web service and the Redis Cache
  • On the second pod there will be the MySQL database
  • YML files just text file that define the pods and the services
  • The first part is called the 'web' pod

Lab Instructions

We will now go and opened the three YAML files and look inside of them to see how they are constructed.

  1. Change directory to the Deploy directory (cd Deploy)
  2. Execute vim web-pod-1.yml.
  3. Review the contents.
    1. You will notice that there are two images that make up the pod
      1. REDIS (using the one already built and available at hub.docker.com)
      2. py-red (the one we just built in a prior section of this lab)
      3. understand the other metadata that you see there, such as the container port, the labels and names used.

web-pod-1.yml

Defines the pod for the web part of the application.

Anytime you see "brunoterkaly," you need to replace that with your own account name at hub.docker.com.

 apiVersion: "v1"
kind: Pod
metadata:
  name: web1
  labels:
    name: web
    app: demo
spec:
  containers:
    - name: redis
      image: redis
      ports:
        - containerPort: 6379
          name: redis
          protocol: TCP
    - name: python
      image: brunoterkaly/py-red
      env:       
        - name: "REDIS_HOST"
          value: "localhost"
      ports:
        - containerPort: 5000
          name: http
          protocol: TCP

Lab Instructions

In this section we will understand the database layer. Once again, you will notice that we are using one of the images of at hub.docker.com that is specific for MySQL. Let's note that when we use these YAML files, those images will be downloaded automatically onto our Kubernetes cluster from hub.docker.com.

When we complete this section you will now understand the two pods that are running inside of the Kubernetes cluster. It makes sense that we would want to group the Python web service with the REDIS cache on the same pod to minimize latency.

  1. Change directory to the Deploy directory(cd Deploy)
  2. Execute vim db-pod.yml.
  3. Review the contents.
    1. You will notice that there is just one image that is included in this pod
    2. It is the MySQL database
  4. Execute vim db-svc.yml.
  5. Review the contents.
    1. There are no references to images in this YAML file as its main purpose is to simply expose the pods and map incoming ports to the container
    2. Notice that when an incoming request comes on port 3306, it gets routed to port 3306 for the MySQL database

db-pod.yml

 apiVersion: "v1"
kind: Pod
metadata:
  name: mysql
  labels:
    name: mysql
    app: demo
spec:
  containers:
    - name: mysql
      image: mysql:latest
      ports:
        - containerPort: 3306         
          protocol: TCP
      env: 
        - 
          name: "MYSQL_ROOT_PASSWORD"
          value: "password"

db-svc.yml

 apiVersion: v1
kind: Service
metadata:
  name: mysql
  labels:
    name: mysql
    app: demo  
spec:
  ports:
  - port: 3306
    name: mysql
    targetPort: 3306
  selector:
    name: mysql
    app: demo

Lab Instructions

In this third section of YAML files. We will discuss how we would make the web service pod accessible through the use of a service. You have probably notice that there is a YAML entry called kind, which indicates the type of Kubernetes object. We would like to instantiate. There are several, but for this lab we are focusing on pod in-service.

  1. Change directory to the Deploy directory (cd Deploy)
  2. Execute vim web-svc.yml.
  3. Review the contents.
    1. There are no references to images in this YAML file as its main purpose is to simply expose the pods and map incoming ports to the container
    2. notice that when an incoming request comes on port 80, it gets routed to port 5000 for the Python and REDIS pod

NodePort: Exposes the service on each Node’s IP at a static port (the NodePort). A ClusterIP service, to which the NodePort service will route, is automatically created. You’ll be able to contact the NodePort service, from outside the cluster, by requesting :.

web-svc.yml

 apiVersion: v1
kind: Service
metadata:
  name: web
  labels:
    name: web
    app: demo
spec:
  selector:
    name: web 
  type: NodePort
  ports:
   - port: 80
     name: http
     targetPort: 5000
     protocol: TCP

db-svc.yml

 apiVersion: v1
kind: Service
metadata:
  name: mysql
  labels:
    name: mysql
    app: demo  
spec:
  ports:
  - port: 3306
    name: mysql
    targetPort: 3306
  selector:
    name: mysql
    app: demo

Part 6 - Getting started with kubectl

Previously we discussed some videos to help you get set up. As part of that set up process. We need to get a configuration file onto a developer computer so that it can appropriately communicate with the Kubernetes cluster. That is done through a config file.

For the sake of completeness, here are some commands to get that done.

Getting the 'config' file

  • We will use the Python and Azure SDK's to retrieve this file
  • It will put it in a special folder from which we will copy it into the current directory

The videos outlined at the beginning of this document describe how to set up your Kubernetes cluster on Azure. The videos also cover: - Getting the config file - Getting the kubectl command

Here are some examples of commands to create the Kubernetes cluster using Python. You do not need to do these commands as this lab assumes you have a Kubernetes cluster.

 az login
az account set --subscription "c884f[your subscription ID goes here]2fa28"
# See Output 1
az ad sp create-for-rbac --role="Owner" --scopes="/subscriptions/c884f3c[your subscription ID goes here]42fa28"
# See Output 2
RESOURCE_GROUP=ascend-k8s-rg
DNS_PREFIX=ascend-k8s
SERVICE_NAME=ascend-k8s-svc
az group create \
        --name $RESOURCE_GROUP \
            --location "centralus"
RESOURCE_GROUP=ascend-k8s-rg
DNS_PREFIX=ascend-k8s
CLUSTER_NAME=btk8s
az acs create --orchestrator-type=kubernetes \
         --resource-group $RESOURCE_GROUP \
         --name=$CLUSTER_NAME --dns-prefix=$DNS_PREFIX
az acs kubernetes get-credentials --resource-group=$RESOURCE_GROUP --name=$CLUSTER_NAME

Note that you will need to substitute your own information for what you see above. For example, the subscription ID you see will need to be your own.

Anytime you see the commands include, "az acs" you should realize that this involves the Azure and Python SDK to be installed on your developer computer.

You will also need to take special note with some of the environment variables you see above, substituting your own names as indicated below.

Notes about the code snippet above

You can get more information about provisioning your own Kubernetes cluster here in addition to the videos previously presented:

https://docs.microsoft.com/en-us/azure/container-service/container-service-kubernetes-walkthrough

Setting environment variable (KUBECONFIG) and getting kubectl

This environment variable is used by kubectl to know where to retrieve the config file.

Lab Instructions

  1. Run the export command as seen below for KUBECONFIG
    1. You can add this to ~/.bashrc for a more permanent solution
  2. Run the az acs kubernetes install-cli as seen below, in addition to the test specified
  3. Review the following URLs for more information:
    1. https://www.youtube.com/watch?v=qW6mzCJg4tI
    2. https://www.youtube.com/watch?v=2316KyERwvg

Here is the command that allows the system to find your config file

 export KUBECONFIG=`pwd`/config

We will also want to get the kubectl utility, which is the mechanism we can use to communicate with their Kubernetes cluster. It works in conjunction with the config file just addressed.

 # obtain the kubectl utility
az acs kubernetes install-cli
# test the utility
kubectl cluster-info

You can see the config file below being copied to the current working directory. You probably want to think about a more permanent location for the config file longer-term, but for now let's just copy it to a local directory for ease of use.

It's important to note that it's this config file that will enable us to communicate with the Kubernetes cluster from our Linux VM.

kubernetes0010

Figure 8: Verifying config

Part 7 - Using kubectl to run containers, provision pods, and provision services

We have now laid the groundwork for using kubectl. This means that we can begin to communicate with the cluster and indicate to the cluster which containers we wish to run in which pods and how to expose the pods through services.

So that I do not have to type kubectl over and over, I have run this following command in Linux to create an alias:

 alias k=kubectl

This means I can just use k instead of kubectl.

To test that things are working correctly you can use the kubectl command to get information about the cluster, as follows:

 kubectl cluster-info
#or
k cluster-info

If everything is working correctly, you should see the following:

kubernetes0011

Figure 9: Information about your cluster

Running the pods and services

At this point we are going to run the pods and services. You will find a file called run.sh. this file is simply encapsulating the running of four YAML files with the kubectl utility. They can be run in any order. But you can see that we are running a pod, then a service, one set of commands for the web layer and one set of commands for the database layer.

Lab Instructions

The next step is to run our pods in our services, leveraging the kubectl utility.

  1. Change directory to the Deploy directory (cd Deploy)
  2. Execute vim run.sh.
  3. Validate that it resembles the script defined below.
  4. Exit out of run.sh.
  5. At the command prompt, issue a bash run.sh command.

run.sh

 kubectl create -f db-pod.yml
kubectl create -f db-svc.yml
kubectl create -f web-pod-1.yml
kubectl create -f web-svc.yml

The output of the command should look something like this:

kubernetes0012

Figure 10: Running run.sh

Once all the pods and services are running in the cluster, you can issue other commands to actually see the running pods and services.

Command to list running pods:

 kubectl get pods

Command to list running services:

 kubectl get svc

kubernetes0013

Figure 11: Viewing the pods and services at the command line

Exposing the web service through an external IP address

Let's imagine that we want to open up this web service so that others can access it. This requires us to open up an external IP address. Notice that in the diagram, "Viewing the pods and services at the command line," the external address for the web component reads .

Lab Instructions

What will do in the next step is actually create a real external IP address that allows us to get access to the Python web service.

  1. At the command line, type in kubectl edit svc/web
  2. Navigate down two line 28 where you will see the type field, and replace NodePort with LoadBalancer.
    1. See figure, "Exposing an external IP address"

kubernetes0014

Figure 12: Exposing an external IP address

Command to expose an external IP address for our Web service:

 kubectl edit svc/web

Editing the web service file should look like this. nnotice that we did switch the **type ** element to LoadBalancer.

 # Please edit the object below. Lines beginning with a '#' will be ignored,
# and an empty file will abort the edit. If an error occurs while saving this file will be
# reopened with the relevant failures.
#
apiVersion: v1
kind: Service
metadata:
  creationTimestamp: 2017-02-15T22:00:51Z
  labels:
    app: demo
    name: web
  name: web
  namespace: default
  resourceVersion: "149793"
  selfLink: /api/v1/namespaces/default/services/web
  uid: 36eee4e7-f3ca-11e6-a3cd-000d3a9203fe
spec:
  clusterIP: 10.0.73.141
  ports:
  - name: http
    nodePort: 30189
    port: 80
    protocol: TCP
    targetPort: 5000
  selector:
    name: web
  sessionAffinity: None
  type: LoadBalancer
status:
  loadBalancer:
    ingress:
    - ip: 13.89.230.209

Part 8 - Testing the application

Our application is now running in the Kubernetes cluster. In this next section we will run some commands to test it out. First, we will initialize the database. second, we will add some data to the database. And in the third section, we will actually test the queries and make sure that they leverage the REDIS cache, before actually hitting the underlying MySQL database.

Understanding the three Python routes

  • In the last section we even exposed an external IP address, allowing us to pretty much access web service from anywhere.

  • As you recall, there are three endpoints that we can use to access the web service.

  • The three routes:

    • init
    • couses/add
    • courses/{course id}

    https://XXX/init https://XXX/courses/add https://XXX/courses/{course id}

Lab Instructions

The testing process starts by initializing the database.

  1. Return back to the Linux command prompt.
  2. Type in curl https://[public IP address the service]/init
    1. See the command below for details

kubectl get svc

In order to retrieve the external IP address, type:

 kubectl get svc

kubernetes0032

Figure 13: Requesting a list of running services

Once we have this at IP address, we can begin to write requests into our Python web service. you will notice the response from the system, saying, DB Initialization done.

 curl 40.69.141.235/init

kubernetes0033

Figure 14: Initializing the database with the curl command

As you recall, we setup a route within the Python and flask code to drop the database and re-created table.

Notice that, as a result of the user hitting the endpoint (https://..../init), a series of database related commands get executed. A database is created along with the table called, "courses".

kubernetes0038

Figure 15: The Python script that initializes the database and creates a table

Notice that, as a result of the user hitting the endpoint (https://..../init), a series of database related commands get executed. A database is created along with the table called, “courses”.

We now need to insert some data. Notice the shell script displayed below, called app.sh. Notice that it uses curl to post JSON data to the web service. It essentially inserts 3 records into the MySQL database. Notice the various fields that get POSTED (UID, course number, course title, and notes).

 cd ../Run
cat add.sh

kubernetes0034

Figure 16: Viewing the script code to insert data

Notice that during execution of the script, the system returns back HTTP 200 OK, indicating that the records were successfully processed and inserted into the MySQL database

 bash add.sh

kubernetes0035

Figure 17: Executing the code to insert data

The important activity that remains is to query the database. Take note of the file called, query.sh, which simply hits the web service with the query based on UID. Notice that we had passed in UID of “1”, “2”, or “3”.

 cat query.sh

kubernetes0036

Figure 18: Viewing the code to query the data

Now we simply go request those records. An important note here is that on the first call the MySQL database will retrieve the data. At that point, the REDIS cash will get a copy of that data, meaning that subsequent queries will actually get retrieve from the REDIS cash, sitting a trip to the database, which would be slower and represent additional network traffic.

 bash query.sh

kubernetes0037

Figure 19: Executing the code to query the data

Summary

This lab has taught some important lessons. First, is a description about how containers and pods can work together to define an application. From there, we took a look at setting up a kubernetes SVC to these pods. Along the way we learned about the importance of kubectl, which is a commandline tool that allows us to interact with the Kubernetes cluster.

We also studied the use of YAML files, which provide a declarative syntax, allowing us to define the way we want to define our topology for our application. For example, we were able to define the containers that make up pods as well as the services that expose pods to the outside world for public IP or external IP address.