Eksempler på LINQ-forespørgsler

 

Udgivet: januar 2017

Gælder for: Dynamics 365 (online), Dynamics 365 (on-premises), Dynamics CRM 2016, Dynamics CRM Online

Dette emne indeholder mange eksempler på LINQ-forespørgsler. Du kan se hele eksemplet under Eksempel: Komplekse LINQ-forespørgsler.

Dette emne indeholder

Simpel Where-klausul

Join og Simple Where-delsætning

Bruge operatoren Distinct

Enkel indre joinforbindelse

Selvjoinforbindelse

Dobbelte og flere joinforbindelser

Joinforbindelse med objektfelter

Sen binding i venstre joinforbindelse

Bruge operatoren Equals

Bruge operatoren Not Equals

Brug en metodebaseret LINQ-forespørgsel med en Where-delsætning

Brug operatoren Greater Than

Brug operatorerne Greater Than eller Equals og Less Than eller Equals

Brug operatoren Contains

Brug operatoren Does Not Contain

Brug operatorerne StartsWith og EndsWith

Brug operatorerne And og Or

Brug operatoren OrderBy

Brug operatorerne First og Single

Henter formaterede værdier

Brug operatorerne Skip og Take uden sideopdeling

Brug operatorerne FirstOrDefault og SingleOrDefault

Brug en selvjoinforbindelse med en betingelse på det tilknyttede objekt

Brug en transformering i Where-delsætningen

Brug en sideopdelingssortering

Hent relaterede objektkolonner for 1 til N-relationer

Brug .value til at hente værdien af en attribut

Flere projektioner, ny datatype-casting til forskellige typer

Brug metoden GetAttributeValue

Brug matematiske metoder

Brug Multiple Select- og Where-delsætninger

Brug SelectMany

Brug strengfunktioner

Brug to Where-delsætninger

Brug LoadProperty til at hente relaterede poster

Simpel Where-klausul

I følgende eksempel vises, hvordan du henter en liste over firmaer, hvor Name indeholder "Contoso".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_where1 = from a in svcContext.AccountSet
                    where a.Name.Contains("Contoso")
                    select a;
 foreach (var a in query_where1)
 {
  System.Console.WriteLine(a.Name + " " + a.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_where1 = From c In svcContext.AccountSet _
                    Where c.Name.Contains("Contoso") _
                    Select c

 For Each c In query_where1
  Console.WriteLine(c.Name & " " & c.Address1_City)
 Next c
End Using

I følgende eksempel vises, hvordan du henter en liste over firmaer, hvor Name indeholder "Contoso" og Address1_City er "Redmond".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_where2 = from a in svcContext.AccountSet
                    where a.Name.Contains("Contoso")
                    where a.Address1_City == "Redmond"
                    select a;

 foreach (var a in query_where2)
 {
  System.Console.WriteLine(a.Name + " " + a.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_where2 = From c In svcContext.AccountSet _
                    Where c.Name.Contains("Contoso") _
                    Where c.Address1_City.Equals("Redmond") _
                    Select c

 For Each c In query_where2
  Console.WriteLine(c.Name & " " & c.Address1_City)
 Next c
End Using

Join og Simple Where-delsætning

I følgende eksempel vises, hvordan du henter firmaet Name og kontakten LastName, hvor firmaet Name indeholder "Contoso", og kontakten LastName indeholder "Smith", og kontakten er den primære kontakt for firmaet.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_where3 = from c in svcContext.ContactSet
                    join a in svcContext.AccountSet
                    on c.ContactId equals a.PrimaryContactId.Id
                    where a.Name.Contains("Contoso")
                    where c.LastName.Contains("Smith")
                    select new
                    {
                     account_name = a.Name,
                     contact_name = c.LastName
                    };

 foreach (var c in query_where3)
 {
  System.Console.WriteLine("acct: " +
   c.account_name +
   "\t\t\t" +
   "contact: " +
   c.contact_name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_where3 = From c In svcContext.ContactSet _
                    Join a In svcContext.AccountSet _
                    On c.ContactId Equals a.account_primary_contact.Id _
                    Where a.Name.Contains("Contoso") _
                    Where c.LastName.Contains("Smith") _
                    Select New With {Key .account_name = a.Name,
                                     Key .contact_name = c.LastName}

 For Each c In query_where3
  Console.WriteLine("acct: " & c.account_name & vbTab & vbTab _
                    & vbTab & "contact: " & c.contact_name)
 Next c
End Using

Bruge operatoren Distinct

I følgende eksempel vises, hvordan du henter en særskilt liste over kontakters efternavne. Selvom der måske er dubletter, vises hvert navn kun én gang.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_distinct = (from c in svcContext.ContactSet
                       select c.LastName).Distinct();
 foreach (var c in query_distinct)
 {
  System.Console.WriteLine(c);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_distinct = ( _
     From c In svcContext.ContactSet _
     Select c.LastName).Distinct()
 For Each c In query_distinct
  Console.WriteLine(c)
 Next c
End Using

Enkel indre joinforbindelse

I følgende eksempel vises, hvordan du henter oplysninger om et firma og den kontakt, der er angivet som den primære kontakt for firmaet.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_join1 = from c in svcContext.ContactSet
                   join a in svcContext.AccountSet
                  on c.ContactId equals a.PrimaryContactId.Id
                   select new
                   {
                    c.FullName,
                    c.Address1_City,
                    a.Name,
                    a.Address1_Name
                   };
 foreach (var c in query_join1)
 {
  System.Console.WriteLine("acct: " +
   c.Name +
   "\t\t\t" +
   "contact: " +
   c.FullName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_join1 = From c In svcContext.ContactSet _
                   Join a In svcContext.AccountSet _
                   On c.ContactId Equals a.account_primary_contact.Id _
                   Select New With {Key c.FullName, Key c.Address1_City,
                                    Key a.Name, Key a.Address1_Name}
 For Each c In query_join1
  Console.WriteLine("acct: " & c.Name & vbTab & vbTab _
                    & vbTab & "contact: " & c.FullName)
 Next c
End Using

Selvjoinforbindelse

I følgende eksempel vises, hvordan du henter oplysninger om firmaer, hvor et firma er det overordnede firma.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_join5 = from a in svcContext.AccountSet
                   join a2 in svcContext.AccountSet
                   on a.ParentAccountId.Id equals a2.AccountId

                   select new
                   {
                    account_name = a.Name,
                    account_city = a.Address1_City
                   };
 foreach (var c in query_join5)
 {
  System.Console.WriteLine(c.account_name + "  " + c.account_city);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_join5 = From a In svcContext.AccountSet _
                   Join a2 In svcContext.AccountSet _
                   On a.ParentAccountId.Id Equals a2.AccountId _
                   Select New With {
                         Key .account_name = a.Name,
                         Key .account_city = a.Address1_City
                         }
 For Each c In query_join5
  Console.WriteLine(c.account_name & "  " & c.account_city)
 Next c
End Using

Dobbelte og flere joinforbindelser

I følgende eksempel vises, hvordan du henter oplysninger fra et firma, en kontakt og en potentiel kunde, hvor kontakten er den primære kontakt for firmaet, og den potentielle kunde var kildekundeemnet for firmaet.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_join4 = from a in svcContext.AccountSet
                   join c in svcContext.ContactSet
                   on a.PrimaryContactId.Id equals c.ContactId
                   join l in svcContext.LeadSet
                   on a.OriginatingLeadId.Id equals l.LeadId
                   select new
                   {
                    contact_name = c.FullName,
                    account_name = a.Name,
                    lead_name = l.FullName
                   };
 foreach (var c in query_join4)
 {
  System.Console.WriteLine(c.contact_name +
   "  " +
   c.account_name +
   "  " +
   c.lead_name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_join4 = From a In svcContext.AccountSet _
                   Join c In svcContext.ContactSet _
                   On a.PrimaryContactId.Id Equals c.ContactId _
                   Join l In svcContext.LeadSet _
                   On a.OriginatingLeadId.Id Equals l.LeadId _
                   Select New With {Key .contact_name = c.FullName,
                                    Key .account_name = a.Name,
                                    Key .lead_name = l.FullName}
 For Each c In query_join4
  Console.WriteLine(c.contact_name & "  " & c.account_name _
                    & "  " & c.lead_name)
 Next c
End Using

I følgende eksempel vises, hvordan du henter firma- og kontaktoplysninger, hvor et firma er det overordnede firma for et firma, og kontakten er den primære kontakt for firmaet.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_join6 = from c in svcContext.ContactSet
                   join a in svcContext.AccountSet
                   on c.ContactId equals a.PrimaryContactId.Id
                   join a2 in svcContext.AccountSet
                   on a.ParentAccountId.Id equals a2.AccountId
                   select new
                   {
                    contact_name = c.FullName,
                    account_name = a.Name
                   };
 foreach (var c in query_join6)
 {
  System.Console.WriteLine(c.contact_name + "  " + c.account_name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_join6 = From c In svcContext.ContactSet _
                   Join a In svcContext.AccountSet _
                   On c.ContactId Equals a.PrimaryContactId.Id _
                   Join a2 In svcContext.AccountSet _
                   On a.ParentAccountId.Id Equals a2.AccountId _
                   Select New With {Key .contact_name = c.FullName,
                                    Key .account_name = a.Name}
 For Each c In query_join6
  Console.WriteLine(c.contact_name & "  " & c.account_name)
 Next c
End Using

Joinforbindelse med objektfelter

I følgende eksempel vises, hvordan du henter oplysninger om firmaer fra en liste

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var list_join = (from a in svcContext.AccountSet
                  join c in svcContext.ContactSet
                  on a.PrimaryContactId.Id equals c.ContactId
                  where a.Name == "Contoso Ltd" &&
                  a.Address1_Name == "Contoso Pharmaceuticals"
                  select a).ToList();
 foreach (var c in list_join)
 {
  System.Console.WriteLine("Account " + list_join[0].Name
      + " and it's primary contact "
      + list_join[0].PrimaryContactId.Id);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim list_join = ( _
     From a In svcContext.AccountSet _
     Join c In svcContext.ContactSet _
     On a.PrimaryContactId.Id Equals c.ContactId _
     Where a.Name.Equals("Contoso Ltd") _
     And a.Address1_Name.Equals("Contoso Pharmaceuticals") _
     Select a).ToList()
 For Each c In list_join
  Console.WriteLine("Account " & list_join(0).Name _
                    & " and it's primary contact " _
                    & list_join(0).PrimaryContactId.Id.ToString())
 Next c
End Using

Sen binding i venstre joinforbindelse

I følgende eksempel vises en venstre joinforbindelse. En venstre join-forbindelse er designet til at returnere overordnede med og uden underordnede fra to kilder. Der er en sammenhæng mellem overordnede og underordnede, men der findes faktisk ingen underordnede.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_join8 = from a in svcContext.AccountSet
                   join c in svcContext.ContactSet
                   on a.PrimaryContactId.Id equals c.ContactId
                   into gr
                   from c_joined in gr.DefaultIfEmpty()
                   select new
                   {
                    contact_name = c_joined.FullName,
                    account_name = a.Name
                   };
 foreach (var c in query_join8)
 {
  System.Console.WriteLine(c.contact_name + "  " + c.account_name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_join8 = From a In svcContext.AccountSet _
                   Group Join c In svcContext.ContactSet _
                   On a.PrimaryContactId.Id Equals c.ContactId Into gr = _
                   Group From c_joined In gr.DefaultIfEmpty() _
                   Select New With {Key .contact_name = c_joined.FullName,
                                    Key .account_name = a.Name}
 For Each c In query_join8
  Console.WriteLine(c.contact_name & "  " & c.account_name)
 Next c
End Using

Bruge operatoren Equals

I følgende eksempel vises, hvordan du henter en liste over kontakter, hvor FirstName er "Colin".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_equals1 = from c in svcContext.ContactSet
                     where c.FirstName.Equals("Colin")
                     select new
                     {
                      c.FirstName,
                      c.LastName,
                      c.Address1_City
                     };
 foreach (var c in query_equals1)
 {
  System.Console.WriteLine(c.FirstName +
   " " + c.LastName +
   " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_equals1 = From c In svcContext.ContactSet _
                     Where c.FirstName.Equals("Colin") _
                     Select New With {Key c.FirstName,
                                      Key c.LastName,
                                      Key c.Address1_City}
 For Each c In query_equals1
  Console.WriteLine(c.FirstName & " " & c.LastName & " " _
                    & c.Address1_City)
 Next c
End Using

I følgende eksempel vises, hvordan du henter en liste over kontakter, hvor FamilyStatusCode er 3. Dette svarer til indstillingen Civilstand for Skilt.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_equals2 = from c in svcContext.ContactSet
                     where c.FamilyStatusCode.Equals(3)
                     select new
                     {
                      c.FirstName,
                      c.LastName,
                      c.Address1_City
                     };
 foreach (var c in query_equals2)
 {
  System.Console.WriteLine(c.FirstName +
   " " + c.LastName +
   " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_equals2 = From c In svcContext.ContactSet _
                     Where c.FamilyStatusCode.Equals(3) _
                     Select New With {Key c.FirstName,
                                      Key c.LastName,
                                      Key c.Address1_City}
 For Each c In query_equals2
  Console.WriteLine(c.FirstName & " " & c.LastName & " " _
                    & c.Address1_City)
 Next c
End Using

Bruge operatoren Not Equals

I følgende eksempel vises, hvordan du henter en liste over kontakter, hvor Address1_City ikke er "Redmond".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_ne1 = from c in svcContext.ContactSet
                 where c.Address1_City != "Redmond"
                 select new
                 {
                  c.FirstName,
                  c.LastName,
                  c.Address1_City
                 };
 foreach (var c in query_ne1)
 {
  System.Console.WriteLine(c.FirstName + " " +
   c.LastName + " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_ne1 = From c In svcContext.ContactSet _
                 Where c.Address1_City IsNot "Redmond" _
                 Select New With {Key c.FirstName,
                                  Key c.LastName,
                                  Key c.Address1_City}
 For Each c In query_ne1
  Console.WriteLine(c.FirstName & " " & c.LastName _
                    & " " & c.Address1_City)
 Next c
End Using

I følgende eksempel vises, hvordan du henter en liste over kontakter, hvor FirstName ikke er "Colin".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_ne2 = from c in svcContext.ContactSet
                 where !c.FirstName.Equals("Colin")
                 select new
                 {
                  c.FirstName,
                  c.LastName,
                  c.Address1_City
                 };

 foreach (var c in query_ne2)
 {
  System.Console.WriteLine(c.FirstName + " " +
   c.LastName + " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_ne2 = From c In svcContext.ContactSet _
                 Where (Not c.FirstName.Equals("Colin")) _
                 Select New With {Key c.FirstName,
                                  Key c.LastName,
                                  Key c.Address1_City}

 For Each c In query_ne2
  Console.WriteLine(c.FirstName & " " & c.LastName & " " _
                    & c.Address1_City)
 Next c
End Using

Brug en metodebaseret LINQ-forespørgsel med en Where-delsætning

I følgende eksempel vises, hvordan du henter en liste over kontakter, hvor LastName er "Smith" eller indeholder "Smi".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var methodResults = svcContext.ContactSet
  .Where(a => a.LastName == "Smith");
 var methodResults2 = svcContext.ContactSet
  .Where(a => a.LastName.StartsWith("Smi"));
 Console.WriteLine();
 Console.WriteLine("Method query using Lambda expression");
 Console.WriteLine("---------------------------------------");
 foreach (var a in methodResults)
 {
  Console.WriteLine("Name: " + a.FirstName + " " + a.LastName);
 }
 Console.WriteLine("---------------------------------------");
 Console.WriteLine("Method query 2 using Lambda expression");
 Console.WriteLine("---------------------------------------");
 foreach (var a in methodResults2)
 {
  Console.WriteLine("Name: " + a.Attributes["firstname"] +
   " " + a.Attributes["lastname"]);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim methodResults = svcContext.ContactSet _
                     .Where(Function(a) a.LastName.Equals("Smith"))
 Dim methodResults2 = svcContext.ContactSet _
                      .Where(Function(a) a.LastName.StartsWith("Smi"))
 Console.WriteLine()
 Console.WriteLine("Method query using Lambda expression")
 Console.WriteLine("---------------------------------------")
 For Each a In methodResults
  Console.WriteLine("Name: " & a.FirstName & " " & a.LastName)
 Next a
 Console.WriteLine("---------------------------------------")
 Console.WriteLine("Method query 2 using Lambda expression")
 Console.WriteLine("---------------------------------------")
 For Each a In methodResults2
  Console.WriteLine("Name: " & a.Attributes("firstname").ToString() _
                    & " " & a.Attributes("lastname").ToString())
 Next a
End Using

Brug operatoren Greater Than

I følgende eksempel vises, hvordan du henter en liste over kontaktpersoner med en Anniversary-dato, der er senere end den 5. februar 2010.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_gt1 = from c in svcContext.ContactSet
                 where c.Anniversary > new DateTime(2010, 2, 5)
                 select new
                 {
                  c.FirstName,
                  c.LastName,
                  c.Address1_City
                 };

 foreach (var c in query_gt1)
 {
  System.Console.WriteLine(c.FirstName + " " +
   c.LastName + " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_gt1 = From c In svcContext.ContactSet _
                 Where c.Anniversary > New Date(2010, 2, 5) _
                 Select New With {Key c.FirstName,
                                  Key c.LastName,
                                  Key c.Address1_City}

 For Each c In query_gt1
  Console.WriteLine(c.FirstName & " " & c.LastName _
                    & " " & c.Address1_City)
 Next c
End Using

I følgende eksempel vises, hvordan du henter kontakter med en CreditLimit, der er større end $20.000.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_gt2 = from c in svcContext.ContactSet
                 where c.CreditLimit.Value > 20000
                 select new
                 {
                  c.FirstName,
                  c.LastName,
                  c.Address1_City
                 };
 foreach (var c in query_gt2)
 {
  System.Console.WriteLine(c.FirstName + " " +
   c.LastName + " " + c.Address1_City);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_gt2 = From c In svcContext.ContactSet _
                 Where c.CreditLimit.Value > 20000 _
                 Select New With {Key c.FirstName,
                                  Key c.LastName,
                                  Key c.Address1_City}
 For Each c In query_gt2
  Console.WriteLine(c.FirstName & " " & c.LastName _
                    & " " & c.Address1_City)
 Next c
End Using

Brug operatorerne Greater Than eller Equals og Less Than eller Equals

I følgende eksempel vises, hvordan du henter kontakter med en CreditLimit, der er større end $200 og mindre end $400.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_gele1 = from c in svcContext.ContactSet
                   where c.CreditLimit.Value >= 200 &&
                   c.CreditLimit.Value <= 400
                   select new
                   {
                    c.FirstName,
                    c.LastName
                   };
 foreach (var c in query_gele1)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_gele1 = From c In svcContext.ContactSet _
                   Where c.CreditLimit.Value >= 200 _
                   AndAlso c.CreditLimit.Value <= 400 _
                   Select New With {Key c.FirstName,
                                    Key c.LastName}
 For Each c In query_gele1
  Console.WriteLine(c.FirstName &amp; " " &amp; c.LastName)
 Next c
End Using

Brug operatoren Contains

I følgende eksempel vises, hvordan du henter kontakter, hvor Description indeholder "Alpine".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_contains1 = from c in svcContext.ContactSet
                       where c.Description.Contains("Alpine")
                       select new
                       {
                        c.FirstName,
                        c.LastName
                       };
 foreach (var c in query_contains1)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_contains1 = From c In svcContext.ContactSet _
                       Where c.Description.Contains("Alpine") _
                       Select New With {Key c.FirstName,
                                        Key c.LastName}
 For Each c In query_contains1
  Console.WriteLine(c.FirstName & " " & c.LastName)
 Next c
End Using

Brug operatoren Does Not Contain

I følgende eksempel vises, hvordan du henter kontakter, hvor Description ikke indeholder "Coho".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_contains2 = from c in svcContext.ContactSet
                       where !c.Description.Contains("Coho")
                       select new
                       {
                        c.FirstName,
                        c.LastName
                       };
 foreach (var c in query_contains2)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_contains2 = From c In svcContext.ContactSet _
                       Where (Not c.Description.Contains("Coho")) _
                       Select New With {Key c.FirstName,
                                        Key c.LastName}
 For Each c In query_contains2
  Console.WriteLine(c.FirstName.ToString() & " " _
                    & c.LastName.ToString())
 Next c
End Using

Brug operatorerne StartsWith og EndsWith

I følgende eksempel vises, hvordan du henter kontakter, hvor FirstName begynder med "Bri".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_startswith1 = from c in svcContext.ContactSet
                         where c.FirstName.StartsWith("Bri")
                         select new
                         {
                          c.FirstName,
                          c.LastName
                         };
 foreach (var c in query_startswith1)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_startswith1 = From c In svcContext.ContactSet _
                         Where c.FirstName.StartsWith("Bri") _
                         Select New With {Key c.FirstName,
                                          Key c.LastName}
 For Each c In query_startswith1
  Console.WriteLine(c.FirstName.ToString() & " " _
                    & c.LastName.ToString())
 Next c
End Using

I følgende eksempel vises, hvordan du henter kontakter, hvor LastName slutter med "cox".

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_endswith1 = from c in svcContext.ContactSet
                       where c.LastName.EndsWith("cox")
                       select new
                       {
                        c.FirstName,
                        c.LastName
                       };
 foreach (var c in query_endswith1)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_endswith1 = From c In svcContext.ContactSet _
                       Where c.LastName.EndsWith("cox") _
                       Select New With {Key c.FirstName,
                                        Key c.LastName}
 For Each c In query_endswith1
  Console.WriteLine(c.FirstName.ToString() & " " _
                    & c.LastName.ToString())
 Next c
End Using

Brug operatorerne And og Or

I følgende eksempel vises, hvordan du henter kontakter, hvor Address1_City er "Redmond" eller "Bellevue" og med en CreditLimit, der er større end $200.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_andor1 = from c in svcContext.ContactSet
                    where ((c.Address1_City == "Redmond" ||
                    c.Address1_City == "Bellevue") &&
                    (c.CreditLimit.Value != null &&
                    c.CreditLimit.Value >= 200))
                    select c;

 foreach (var c in query_andor1)
 {
  System.Console.WriteLine(c.LastName + ", " + c.FirstName + " " +
   c.Address1_City + " " + c.CreditLimit.Value);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_andor1 = From c In svcContext.ContactSet _
                    Where c.Address1_City.Equals("Redmond") _
                    OrElse c.Address1_City.Equals("Bellevue") _
                    AndAlso c.CreditLimit.Value >= 200 _
                    Select New With {Key c.FirstName,
                                     Key c.LastName,
                                     Key c.CreditLimit,
                                     Key c.Address1_City}
 For Each c In query_andor1
  Console.WriteLine(c.LastName.ToString() & ", " _
                    & c.FirstName.ToString() & " " _
                    & c.Address1_City.ToString() & " " _
                    & c.CreditLimit.Value.ToString())
 Next c
End Using

Brug operatoren OrderBy

I følgende eksempel vises, hvordan du henter kontakter, der er arrangeret efter CreditLimit i faldende rækkefølge.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_orderby1 = from c in svcContext.ContactSet
                      where !c.CreditLimit.Equals(null)
                      orderby c.CreditLimit descending
                      select new
                      {
                       limit = c.CreditLimit,
                       first = c.FirstName,
                       last = c.LastName
                      };
 foreach (var c in query_orderby1)
 {
  System.Console.WriteLine(c.limit.Value + " " +
   c.last + ", " + c.first);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_orderby1 = From c In svcContext.ContactSet _
                      Where (Not c.CreditLimit.Equals(Nothing)) _
                      Order By c.CreditLimit Descending _
                      Select New With {Key .limit = c.CreditLimit,
                                       Key .first = c.FirstName,
                                       Key .last = c.LastName}
 For Each c In query_orderby1
  Console.WriteLine(c.limit.Value & " " & c.last & ", " _
                    & c.first)
 Next c
End Using

I følgende eksempel vises, hvordan du henter kontakter, der er arrangeret efter LastName i faldende rækkefølge og FirstName i stigende rækkefølge.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_orderby2 = from c in svcContext.ContactSet
                      orderby c.LastName descending,
                      c.FirstName ascending
                      select new
                      {
                       first = c.FirstName,
                       last = c.LastName
                      };

 foreach (var c in query_orderby2)
 {
  System.Console.WriteLine(c.last + ", " + c.first);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_orderby2 = From c In svcContext.ContactSet _
                      Order By c.LastName Descending, _
                      c.FirstName Ascending _
                      Select New With {Key .first = c.FirstName,
                                       Key .last = c.LastName}

 For Each c In query_orderby2
  Console.WriteLine(c.last & ", " & c.first)
 Next c
End Using

Brug operatorerne First og Single

I følgende eksempel vises, hvordan du kun henter den første kontaktpersonpost, der returneres, og kun henter én kontaktpersonpost, der opfylder kriteriet.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 Contact firstcontact = svcContext.ContactSet.First();

 Contact singlecontact = svcContext.ContactSet.Single(c => c.ContactId == _contactId1);
 System.Console.WriteLine(firstcontact.LastName + ", " +
  firstcontact.FirstName + " is the first contact");
 System.Console.WriteLine("==========================");
 System.Console.WriteLine(singlecontact.LastName + ", " +
  singlecontact.FirstName + " is the single contact");
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim firstcontact As Contact = svcContext.ContactSet _
                               .First()
 Console.WriteLine(firstcontact.LastName & ", " _
                   & firstcontact.FirstName _
                   & " is the first contact")
 Console.WriteLine("==========================")
 Dim singlecontact As Contact =
     svcContext.ContactSet _
     .Single(Function(c) c.ContactId.Value.Equals(_contactId1))
 Console.WriteLine(singlecontact.LastName & ", " _
                   & singlecontact.FirstName _
                   & " is the single contact")
End Using

Henter formaterede værdier

I følgende eksempel vises, hvordan du henter etiketten for en OptionSet-indstilling, i dette tilfælde værdien for den aktuelle poststatus.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var list_retrieve1 = from c in svcContext.ContactSet
                      where c.ContactId == _contactId1
                      select new { StatusReason = c.FormattedValues["statuscode"] };
 foreach (var c in list_retrieve1)
 {
  System.Console.WriteLine("Status: " + c.StatusReason);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim list_retrieve1 = From c In svcContext.ContactSet _
                      Where c.ContactId.Value.Equals(_contactId1) _
                      Select New With
                             {Key .StatusReason =
                                 c.FormattedValues("statuscode")}
 For Each c In list_retrieve1
  Console.WriteLine("Status: " & c.StatusReason)
 Next c
End Using

Brug operatorerne Skip og Take uden sideopdeling

I følgende eksempel vises, hvordan du henter netop to poster efter at have sprunget to poster over, hvor LastName ikke er "Parker", ved hjælp af operatorerne Skip og Take.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{

 var query_skip = (from c in svcContext.ContactSet
                   where c.LastName != "Parker"
                   orderby c.FirstName
                   select new
                       {
                        last = c.LastName,
                        first = c.FirstName
                       }).Skip(2).Take(2);
 foreach (var c in query_skip)
 {
  System.Console.WriteLine(c.first + " " + c.last);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_skip = ( _
     From c In svcContext.ContactSet _
     Where c.LastName IsNot "Parker" _
     Order By c.FirstName _
     Select New With {Key .last = c.LastName,
                      Key .first = c.FirstName}).Skip(2).Take(2)
 For Each c In query_skip
  Console.WriteLine(c.first & " " & c.last)
 Next c
End Using

Brug operatorerne FirstOrDefault og SingleOrDefault

Operatoren FirstOrDefault returnerer det første element i en sekvens eller en standardværdi, hvis der ikke findes noget element. Operatorerne SingleOrDefault returnerer et enkelt specifikt element i en sekvens eller en standardværdi, hvis dette element ikke findes. I følgende eksempel vises, hvordan du kan bruge disse operatorer.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{

 Contact firstorcontact = svcContext.ContactSet.FirstOrDefault();

 Contact singleorcontact = svcContext.ContactSet
  .SingleOrDefault(c => c.ContactId == _contactId1);


 System.Console.WriteLine(firstorcontact.FullName +
  " is the first contact");
 System.Console.WriteLine("==========================");
 System.Console.WriteLine(singleorcontact.FullName +
  " is the single contact");
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim firstorcontact As Contact =
     svcContext.ContactSet.FirstOrDefault()
 Console.WriteLine(firstorcontact.FullName & " is the first contact")

 Console.WriteLine("==========================")
 Dim singleorcontact As Contact =
     svcContext.ContactSet _
     .SingleOrDefault(Function(c) c.ContactId.Value.Equals(_contactId1))
 Console.WriteLine(singleorcontact.FullName & " is the single contact")
End Using

Brug en selvjoinforbindelse med en betingelse på det tilknyttede objekt

I følgende eksempel vises, hvordan du henter navnene på to firmaer, hvor det ene firma er det andets overordnede firma.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_joincond = from a1 in svcContext.AccountSet
                      join a2 in svcContext.AccountSet
                      on a1.ParentAccountId.Id equals a2.AccountId
                      where a2.AccountId == _accountId1
                      select new { Account = a1, Parent = a2 };
 foreach (var a in query_joincond)
 {
  System.Console.WriteLine(a.Account.Name + " " + a.Parent.Name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_joincond = From a1 In svcContext.AccountSet _
                      Join a2 In svcContext.AccountSet _
                      On a1.ParentAccountId.Id Equals a2.AccountId _
                      Where a2.AccountId.Value.Equals(_accountId1) _
                      Select New With {Key .Account = a1,
                                       Key .Parent = a2}
 For Each a In query_joincond
  Console.WriteLine(a.Account.Name & " " & a.Parent.Name)
 Next a
End Using

Brug en transformering i Where-delsætningen

I følgende eksempel vises, hvordan du henter en bestemt kontakt, hvor årsdagen er senere end den 1. januar 2010.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_wheretrans = from c in svcContext.ContactSet
                        where c.ContactId == _contactId1 &&
                        c.Anniversary > DateTime.Parse("1/1/2010")
                        select new
                        {
                         c.FirstName,
                         c.LastName
                        };
 foreach (var c in query_wheretrans)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_wheretrans = From c In svcContext.ContactSet _
                        Where c.ContactId.Value.Equals(_contactId1) _
                        AndAlso c.Anniversary > Date.Parse("1/1/2010") _
                        Select New With {Key c.FirstName,
                                         Key c.LastName}
 For Each c In query_wheretrans
  Console.WriteLine(c.FirstName & " " & c.LastName)
 Next c
End Using

Brug en sideopdelingssortering

I følgende eksempel vises en sortering med flere kolonner og en ekstra betingelse.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_pagingsort1 = (from c in svcContext.ContactSet
                          where c.LastName != "Parker"
                          orderby c.LastName ascending,
                          c.FirstName descending
                          select new { c.FirstName, c.LastName })
                          .Skip(2).Take(2);
 foreach (var c in query_pagingsort1)
 {
  System.Console.WriteLine(c.FirstName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_pagingsort1 = ( _
     From c In svcContext.ContactSet _
     Where c.LastName IsNot "Parker" _
     Order By c.LastName Ascending, c.FirstName Descending _
     Select New With {Key c.FirstName,
                      Key c.LastName}).Skip(2).Take(2)
 For Each c In query_pagingsort1
  Console.WriteLine(c.FirstName & " " & c.LastName)
 Next c
End Using

I følgende eksempel vises en sideopdelingssortering, hvor kolonnen, der sorteres, er forskellig fra den kolonne, der hentes.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_pagingsort2 = (from c in svcContext.ContactSet
                          where c.LastName != "Parker"
                          orderby c.FirstName descending
                          select new { c.FirstName }).Skip(2).Take(2);
 foreach (var c in query_pagingsort2)
 {
  System.Console.WriteLine(c.FirstName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_pagingsort2 = ( _
     From c In svcContext.ContactSet _
     Where c.LastName IsNot "Parker" _
     Order By c.FirstName Descending _
     Select New With {Key c.FirstName}).Skip(2).Take(2)
 For Each c In query_pagingsort2
  Console.WriteLine(c.FirstName)
 Next c
End Using

I følgende eksempel vises, hvordan du henter de første 10 poster.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_pagingsort3 = (from c in svcContext.ContactSet
                          where c.LastName.StartsWith("W")
                          orderby c.MiddleName ascending,
                          c.FirstName descending
                          select new
                          {
                           c.FirstName,
                           c.MiddleName,
                           c.LastName
                          }).Take(10);
 foreach (var c in query_pagingsort3)
 {
  System.Console.WriteLine(c.FirstName + " " +
   c.MiddleName + " " + c.LastName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_pagingsort3 = ( _
     From c In svcContext.ContactSet _
     Where c.LastName.StartsWith("W") _
     Order By c.MiddleName Ascending, c.FirstName Descending _
     Select New With {Key c.FirstName,
                      Key c.MiddleName,
                      Key c.LastName}).Take(10)
 For Each c In query_pagingsort3
  Console.WriteLine(c.FirstName & " " & c.MiddleName & " " & c.LastName)
 Next c
End Using

Hent relaterede objektkolonner for 1 til N-relationer

I følgende eksempel vises, hvordan du henter kolonner fra relaterede firma- og kontaktposter.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_retrieve1 = from c in svcContext.ContactSet
                       join a in svcContext.AccountSet
                       on c.ContactId equals a.PrimaryContactId.Id
                       where c.ContactId != _contactId1
                       select new { Contact = c, Account = a };
 foreach (var c in query_retrieve1)
 {
  System.Console.WriteLine("Acct: " + c.Account.Name +
   "\t\t" + "Contact: " + c.Contact.FullName);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_retrieve1 = From c In svcContext.ContactSet _
                       Join a In svcContext.AccountSet _
                       On c.ContactId Equals a.PrimaryContactId.Id _
                       Where Not c.ContactId.Value.Equals(_contactId1) _
                       Select New With {Key .Contact = c,
                                        Key .Account = a}
 For Each c In query_retrieve1
  Console.WriteLine("Acct: " & c.Account.Name & vbTab & vbTab _
                    & "Contact: " & c.Contact.FullName)
 Next c
End Using

Brug .value til at hente værdien af en attribut

I følgende eksempel vises, hvordan Value bruges til at få adgang til værdien af en attribut.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{

 var query_value = from c in svcContext.ContactSet
                   where c.ContactId != _contactId2
                   select new
                   {
                    ContactId = c.ContactId != null ?
                     c.ContactId.Value : Guid.Empty,
                    NumberOfChildren = c.NumberOfChildren != null ?
                     c.NumberOfChildren.Value : default(int),
                    CreditOnHold = c.CreditOnHold != null ?
                     c.CreditOnHold.Value : default(bool),
                    Anniversary = c.Anniversary != null ?
                     c.Anniversary.Value : default(DateTime)
                   };

 foreach (var c in query_value)
 {
  System.Console.WriteLine(c.ContactId + " " + c.NumberOfChildren + 
   " " + c.CreditOnHold + " " + c.Anniversary);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_value = From c In svcContext.ContactSet _
                   Where Not c.ContactId.Value.Equals(_contactId2) _
                   Select New With
                          {Key .ContactId = If(
                                  c.ContactId IsNot Nothing,
                                  c.ContactId.Value,
                                  Guid.Empty),
                           Key .NumberOfChildren = If(
                               c.NumberOfChildren IsNot Nothing,
                               c.NumberOfChildren.Value, Nothing),
                           Key .CreditOnHold = If(
                               c.CreditOnHold IsNot Nothing,
                               c.CreditOnHold.Value,
                               Nothing),
                           Key .Anniversary = If(
                               c.Anniversary IsNot Nothing,
                               c.Anniversary.Value,
                               Nothing)}

 For Each c In query_value
  Console.WriteLine(c.ContactId.ToString() & " " _
                    & c.NumberOfChildren & " " _
                    & c.CreditOnHold & " " & c.Anniversary)
 Next c
End Using

Flere projektioner, ny datatype-casting til forskellige typer

I følgende eksempel vises flere projektioner, og hvordan værdier castes (konverteres) til en anden type.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_projections = from c in svcContext.ContactSet
                         where c.ContactId == _contactId1
                         && c.NumberOfChildren != null && 
                         c.Anniversary.Value != null
                         select new
                         {
                          Contact = new Contact { 
                           LastName = c.LastName, 
                           NumberOfChildren = c.NumberOfChildren 
                          },
                          NumberOfChildren = (double)c.NumberOfChildren,
                          Anniversary = c.Anniversary.Value.AddYears(1),
                         };
 foreach (var c in query_projections)
 {
  System.Console.WriteLine(c.Contact.LastName + " " + 
   c.NumberOfChildren + " " + c.Anniversary);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_projections = From c In svcContext.ContactSet _
                         Where c.ContactId.Value.Equals(_contactId1) _
                         And Not c.NumberOfChildren.Equals(Nothing) _
                         And Not c.Anniversary.Equals(Nothing) _
        Select New With
               {Key .Contact =
                   New Contact With
                   {.LastName = c.LastName,
                    .NumberOfChildren = c.NumberOfChildren},
                Key .NumberOfChildren = CDbl(c.NumberOfChildren),
                Key .Anniversary = c.Anniversary.Value.AddYears(1)}
 For Each c In query_projections
  Console.WriteLine(c.Contact.LastName & " " & c.NumberOfChildren _
                    & " " & c.Anniversary)
 Next c
End Using

Brug metoden GetAttributeValue

I følgende eksempel vises, hvordan du bruger metoden GetAttributeValue<T>.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_getattrib = from c in svcContext.ContactSet
                       where c.GetAttributeValue<Guid>("contactid") != _contactId1
                       select new
                       {
                        ContactId = c.GetAttributeValue<Guid?>("contactid"),
                        NumberOfChildren = c.GetAttributeValue<int?>("numberofchildren"),
                        CreditOnHold = c.GetAttributeValue<bool?>("creditonhold"),
                        Anniversary = c.GetAttributeValue<DateTime?>("anniversary"),
                       };

 foreach (var c in query_getattrib)
 {
  System.Console.WriteLine(c.ContactId + " " + c.NumberOfChildren + 
   " " + c.CreditOnHold + " " + c.Anniversary);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_getattrib = From c In svcContext.ContactSet _
                       Where Not c.GetAttributeValue(Of Guid)("contactid").Equals( _
                        _contactId1) _
                       Select New With
                              {Key .ContactId =
                                  c.GetAttributeValue(Of Guid?)("contactid"),
                               Key .NumberOfChildren =
                               c.GetAttributeValue(Of Integer?)("numberofchildren"),
                               Key .CreditOnHold =
                               c.GetAttributeValue(Of Boolean?)("creditonhold"),
                               Key .Anniversary =
                               c.GetAttributeValue(Of Date?)("anniversary")}

 For Each c In query_getattrib
  Console.WriteLine(c.ContactId.ToString() & " " _
                    & c.NumberOfChildren & " " & c.CreditOnHold _
                    & " " & c.Anniversary)
 Next c
End Using

Brug matematiske metoder

I følgende eksempel vises, hvordan du bruger forskellige matematiske-metoder.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_math = from c in svcContext.ContactSet
                  where c.ContactId != _contactId2
                  && c.Address1_Latitude != null && 
                  c.Address1_Longitude != null
                  select new
                  {
                   Round = Math.Round(c.Address1_Latitude.Value),
                   Floor = Math.Floor(c.Address1_Latitude.Value),
                   Ceiling = Math.Ceiling(c.Address1_Latitude.Value),
                   Abs = Math.Abs(c.Address1_Latitude.Value),
                  };
 foreach (var c in query_math)
 {
  System.Console.WriteLine(c.Round + " " + c.Floor + 
   " " + c.Ceiling + " " + c.Abs);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_math = From c In svcContext.ContactSet _
                  Where Not c.ContactId.Value.Equals(_contactId2) _
                  AndAlso c.Address1_Latitude IsNot Nothing _
                  AndAlso c.Address1_Longitude IsNot Nothing _
                  Select New With
                         {Key .Round =
                             Math.Round(c.Address1_Latitude.Value),
                          Key .Floor =
                             Math.Floor(c.Address1_Latitude.Value),
                          Key .Ceiling =
                             Math.Ceiling(c.Address1_Latitude.Value),
                          Key .Abs =
                             Math.Abs(c.Address1_Latitude.Value)}
 For Each c In query_math
  Console.WriteLine(c.Round & " " & c.Floor & " " _
                    & c.Ceiling & " " & c.Abs)
 Next c
End Using

Brug Multiple Select- og Where-delsætninger

I følgende eksempel vises flere Select- og Where-delsætninger, der bruger en metodebaseret forespørgselssyntaks.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_multiselect = svcContext.IncidentSet
                        .Where(i => i.IncidentId != _incidentId1)
                        .Select(i => i.incident_customer_accounts)
                        .Where(a => a.AccountId != _accountId2)
                        .Select(a => a.account_primary_contact)
                        .OrderBy(c => c.FirstName)
                        .Select(c => c.ContactId);
 foreach (var c in query_multiselect)
 {
  System.Console.WriteLine(c.GetValueOrDefault());
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_multiselect =
     svcContext.IncidentSet _
     .Where(Function(i) Not i.IncidentId.Value.Equals(_incidentId1)) _
     .Select(Function(i) i.incident_customer_accounts) _
     .Where(Function(a) Not a.AccountId.Value.Equals(_accountId2)) _
     .Select(Function(a) a.account_primary_contact) _
     .OrderBy(Function(c) c.FirstName).Select(Function(c) c.ContactId)
 For Each c In query_multiselect
  Console.WriteLine(c.GetValueOrDefault())
 Next c
End Using

Brug SelectMany

I følgende eksempel vises, hvordan du bruger metoden SelectMany Method.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_selectmany = svcContext.ContactSet
                        .Where(c => c.ContactId != _contactId2)
                        .SelectMany(c => c.account_primary_contact)
                        .OrderBy(a => a.Name);
 foreach (var c in query_selectmany)
 {
  System.Console.WriteLine(c.AccountId + " " + c.Name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_selectmany =
     svcContext.ContactSet _
     .Where(Function(c) Not c.ContactId.Value.Equals(_contactId2)) _
     .SelectMany(Function(c) c.account_primary_contact) _
     .OrderBy(Function(a) a.Name)
 For Each c In query_selectmany
  Console.WriteLine(c.AccountId.ToString() & " " & c.Name)
 Next c
End Using

Brug strengfunktioner

I følgende eksempel vises, hvordan du bruger forskellige strengmetoder.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_string = from c in svcContext.ContactSet
                    where c.ContactId == _contactId2
                    select new
                    {
                     IndexOf = c.FirstName.IndexOf("contact"),
                     Insert = c.FirstName.Insert(1, "Insert"),
                     Remove = c.FirstName.Remove(1, 1),
                     Substring = c.FirstName.Substring(1, 1),
                     ToUpper = c.FirstName.ToUpper(),
                     ToLower = c.FirstName.ToLower(),
                     TrimStart = c.FirstName.TrimStart(),
                     TrimEnd = c.FirstName.TrimEnd(),
                    };

 foreach (var c in query_string)
 {
  System.Console.WriteLine(c.IndexOf + "\n" + c.Insert + "\n" + 
   c.Remove + "\n" + c.Substring + "\n"
                           + c.ToUpper + "\n" + c.ToLower + 
                           "\n" + c.TrimStart + " " + c.TrimEnd);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_string = From c In svcContext.ContactSet _
                    Where c.ContactId.Value.Equals(_contactId2) _
                    Select New With
                           {Key .IndexOf = c.FirstName.IndexOf("contact"),
                            Key .Insert = c.FirstName.Insert(1, "Insert"),
                            Key .Remove = c.FirstName.Remove(1, 1),
                            Key .Substring = c.FirstName.Substring(1, 1),
                            Key .ToUpper = c.FirstName.ToUpper(),
                            Key .ToLower = c.FirstName.ToLower(),
                            Key .TrimStart = c.FirstName.TrimStart(),
                            Key .TrimEnd = c.FirstName.TrimEnd()}

 For Each c In query_string
  Console.WriteLine(c.IndexOf & vbLf & c.Insert & vbLf _
                    & c.Remove & vbLf & c.Substring & vbLf _
                    & c.ToUpper & vbLf & c.ToLower & vbLf _
                    & c.TrimStart & " " & c.TrimEnd)
 Next c
End Using

Brug to Where-delsætninger

I følgende eksempel vises, hvordan du kan bruge to Where-delsætninger.

using (ServiceContext svcContext = new ServiceContext(_serviceProxy))
{
 var query_twowhere = from a in svcContext.AccountSet
                      join c in svcContext.ContactSet 
                      on a.PrimaryContactId.Id equals c.ContactId
                      where c.LastName == "Smith" && c.CreditOnHold != null
                      where a.Name == "Contoso Ltd"
                      orderby a.Name
                      select a;
 foreach (var c in query_twowhere)
 {
  System.Console.WriteLine(c.AccountId + " " + c.Name);
 }
}

Using svcContext As New ServiceContext(_serviceProxy)
 Dim query_twowhere = From a In svcContext.AccountSet _
                      Join c In svcContext.ContactSet _
                      On a.PrimaryContactId.Id Equals c.ContactId _
                      Where c.LastName.Equals("Smith") _
                      AndAlso c.CreditOnHold IsNot Nothing _
                      Where a.Name.Equals("Contoso Ltd") _
                      Order By a.Name _
                      Select a
 For Each c In query_twowhere
  Console.WriteLine(c.AccountId.ToString() & " " & c.Name)
 Next c
End Using

Brug LoadProperty til at hente relaterede poster

I følgende eksempel vises, hvordan LoadProperty bruges til at få adgang til relaterede poster.

Contact benAndrews = svcContext.ContactSet.Where(c => c.FullName == "Ben Andrews").FirstOrDefault();
if (benAndrews != null)
{
 //benAndrews.Contact_Tasks is null until LoadProperty is used.
 svcContext.LoadProperty(benAndrews, "Contact_Tasks");
 Task benAndrewsFirstTask = benAndrews.Contact_Tasks.FirstOrDefault();
 if (benAndrewsFirstTask != null)
 {
  Console.WriteLine("Ben Andrews first task with Subject: '{0}' retrieved.", benAndrewsFirstTask.Subject);
 }
}

Se også

Opret forespørgsler med LINQ (.NET-sprogintegreret forespørgsel)
Eksempel: Oprettelse af en LINQ-forespørgsel

Microsoft Dynamics 365

© 2017 Microsoft. Alle rettigheder forbeholdes. Ophavsret