Sdílet prostřednictvím

Hybrid Direct Flash Access Test

  • Článek

This test checks the behavior of the disk drive when flash is being written to. This will ensure in low power scenarios the disk does not spend time spinning up the drive needlessly. The test does (for each priority): Spin down the disk using a STANDBY_IMMEDIATE command After waiting, check to make sure the disk is spun down. Write to the disk at priority Read the same data that was just written. Check power state to see that it's still spun down. Check to make sure none of the I/O appeared to incur a spinup (2 second I/O) This will loop and repeat the write, starting at 256 KB, increasing to 32 MB at 1 MB chunks over the same starting offset.

Test details

   
Specifications
  • Device.Storage.Hd.Sata.HybridInformation.BasicFunction
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 60
Category Compatibility
Timeout (in minutes) 3600
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

More information

Parameters

Parameter name Parameter description
Verbosity Verbosity of log output. 0 is least verbose, 4 is most verbose
Scenario Scenario that test targets to.
WDKDeviceID Instance path of device to test.
LLU_NetAccessOnly User account for accessing test file share.
LLU_LclAdminUsr User account for running the test.
StorageDriveNumber Drive number of device to test

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.