Upravit

Sdílet prostřednictvím

Web Deploy error codes

  • Článek

Applies to:   Internet Information Services 7.0, Internet Information Services 7.5, Internet Information Services 8.0

For certain common error cases, Web Deploy displays error messages. This article explains why the error message is shown and provides steps to avoid the errors. The error message may be different depending on how Web Deploy is started. For example, Microsoft WebMatrix chooses to show custom error messages. The error messages listed in the next few sections are shown on the msdeploy.exe command line and API:

MySqlDumpNotFound

Diagnosis

Web Deploy might not find the mysqldump.exe executable. This executable is required for MySQL database deployments.

Resolution

You can try either of the following workarounds:

  • Place the executable in C:\Program Files\MySQL\MySQL Server\bin.
  • Set a REG_SZ registry key to point to the executable. For example, set HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\IIS Extensions\MSDeploy\<version>\MySqlDumpPath to c:\mysqldump\mysqldump.exe

RemoteAppNotFound

Diagnosis

The remote application couldn't be found. This error can occur if you try to do a dump of "remotesite/remoteapp" where "remoteapp" doesn't actually exist.

Resolution

Specify a remote application name that actually exists.

FileOrFolderNotFound

Diagnosis

This error can occur if you try to do a SetAcl on a file or folder that doesn't exist.

Resolution

Specify a file or folder that exists.

ERROR_DESTINATION_INVALID

Diagnosis

The computer name is mistyped, or the computer isn't reachable.

Resolution

Try to check if the computer name is valid. Try pinging the computer manually.

ERROR_DESTINATION_NOT_REACHABLE

Diagnosis

Web Management Service or Remote Agent isn't installed or unreachable on the remote computer.

Resolution

Verify that Remote Agent Service or Web Management Service is started on the remote computer, depending on which one you are connecting to. You can execute net start wmsvc and net start msdepsvc on the remote computer to ensure these services are started. Also, ensure that a firewall isn't interrupting communications with the destination.

ERROR_USER_UNAUTHORIZED

Diagnosis

This error code may be shown because of various reasons. It typically indicates an authentication or authorization problem, and can happen because of any of the following reasons:

  • The user doesn't exist.
  • The user doesn't have IIS Manager access to site if connecting using Web Management Service.
  • The site doesn't exist.
  • The password is incorrect.

Resolution

To connect using the Web Management Service, follow these steps:

  1. Verify that the username and password are correct.
  2. Verify that the site exists.
  3. Verify that you have the IIS Manager Permissions to the site's scope.

To connect using the Remote Agent Service, follow these steps:

  1. Verify that the username and password are correct.

  2. Verify that the user account you specified is a member of the Administrators group on the remote computer.

    Note

    If you aren't using the built-in administrator, create a new group called the "MSDepSvcUsers" group and add your new administrator to that group.

  3. Verify that the site exists.

ERROR_USER_NOT_ADMIN

Diagnosis

The ERROR_USER_NOT_ADMIN code is shown if you try to connect to the Remote Agent Service but haven't provided appropriate administrator credentials.

Resolution

The Remote Agent Service accepts either built-in Administrator or Domain Administrator credentials. If you have a non-domain setup and want to use an account other than built-in administrator, do the following steps:

  1. Create a separate user group MSDepSvcUsers on remote computer.
  2. Create a local account A on both local and remote computer.
  3. Add A to MSDepSvcUsers on remote computer.
  4. Use account A to publish, this allows you to publish without the need of a built-in admin account.

ERROR_CERTIFICATE_VALIDATION_FAILED

Diagnosis

The certificate presented by the Web Deploy endpoint is untrusted or invalid. This typically happens if the remote server has a self-signed certificate for the Remote Agent Service or the Web Management Service.

Resolution

Either install a trusted certificate on the endpoint or try bypassing certificate validation.

  1. From the msdeploy.exe command line, pass the -allowUntrusted flag.

  2. From the Visual Studio publish UI, check Allow Untrusted.

  3. From a Visual Studio deployment package (For example, MyApp.deploy.cmd), pass the -allowUntrusted flag.

  4. Add <AllowUntrustedCertificate>true</AllowUntrustedCertificate> to the pubxml file:

    <PropertyGroup>
  <AllowUntrustedCertificate>true</AllowUntrustedCertificate>
</PropertyGroup>

ERROR_PROXY_GATEWAY

Diagnosis

A proxy gateway is preventing Web Deploy from communicating with the remote Web Deploy endpoint.

Resolution

Web Deploy doesn't read system proxy settings. As a workaround, try disabling the system proxy by doing the following steps:

  1. Start Internet Explorer.
  2. Select Tools > Options.
  3. Select Connection.
  4. Select LAN Settings.
  5. Disable all checkboxes.

ERROR_SITE_DOES_NOT_EXIST

Diagnosis

The specified IIS site doesn't exist.

Resolution

Verify that the specified site actually exists. Sometimes, you may get this error if you have specified / instead of \ in site URL. Try changing / to \.

ERROR_APP_DOES_NOT_EXIST

Diagnosis

The specified application doesn't exist in IIS.

Resolution

Check IIS Manager to make sure you have correctly specified the name of the application path.

ERROR_USER_NOT_AUTHORIZED_FOR_IISAPP,

ERROR_USER_NOT_AUTHORIZED_FOR_DBFULLSQL,
ERROR_USER_NOT_AUTHORIZED_FOR_DBMYSQL,
ERROR_USER_NOT_AUTHORIZED_FOR_SETACL,
ERROR_USER_NOT_AUTHORIZED_FOR_APPPOOLNETFX,
ERROR_USER_NOT_AUTHORIZED_FOR_APPPOOLPIPELINE,
ERROR_USER_NOT_AUTHORIZED_FOR_RECYCLEAPP,
ERROR_USER_NOT_AUTHORIZED_FOR_CREATEAPP,
ERROR_USER_NOT_AUTHORIZED_FOR_CONTENTPATH

The group of errors listed share the following diagnosis, resolution, and workaround:

Diagnosis

A non-administrative user attempted to perform an operation with a Web Deploy provider for which the user is n't currently authorized.

Resolution

Web Deploy setup, by default, creates Management Service Delegation Rules, which allow non-administrators to perform operations with this provider. Check that the delegation rule required for this provider has been set up correctly.

Workaround

From the Programs > Control Panel, run Repair on Web Deploy. Alternatively, create the delegation rule manually.

ERROR_USER_NOT_AUTHORIZED_FOR_DEPLOYMENTPROVIDER

Diagnosis

A non-administrative user attempted to perform an operation with a Web Deploy provider for which the user isn't currently authorized. This error code is shown if you try to perform an operation with a provider for which Web Deploy's setup doesn't create a delegation rule.

Resolution

The Web Deploy setup doesn't create a delegation rule for this provider. Create the delegation rule manually.

ERROR_INSUFFICIENT_ACCESS_TO_SITE_FOLDER

Diagnosis

This error can occur when you try to connect over the Web Management Service as a non-administrator:

  • To connect using IIS Manager credentials, the Web Management Service's identity (typically Local Service) needs Full Control permissions on the site's root folder to be able to create files and folders underneath.
  • To connect using Windows credentials, the Windows user needs full control over the site's root folder to be able to create files and folders.

Resolution

Grant the appropriate account Full Control on the site's root folder. Alternatively, do the following steps:

  1. Start IIS Manager and right click on the site in question.
  2. Click Deploy > Configure for Web Deploy Publishing.
  3. Select an appropriate user name.
  4. Click Setup.

ERROR_INSUFFICIENT_ACCESS_TO_APPHOSTCONFIG

Diagnosis

The RunAs identity specified for the createApp delegation rule needs Write access to the IIS server's applicationHost.config file.

Resolution

Provide Write access to the IIS server's applicationHost.config file for the RunAs identity of the createApp delegation rule.

ERROR_INVALID_CONNECTION_STRING

Diagnosis

An invalid database connection string was specified which caused a dbFullSql or dbMySql provider to not run correctly. This error can happen if a connection string is malformed (Example, Se v ver=localhost;...) or if the connection string contains keys, which the target database server doesn't recognize.

Resolution

Verify that the connection string is valid.

ERROR_SQL_EXECUTION_FAILURE

Diagnosis

A SQL script execution failure occurred.

Resolution

This error can happen for many reasons. For more information, see Web development on Windows.

ERROR_TYPE_NOT_FOUND_IN_ASSEMBLY

Diagnosis

The dbFullSql provider of Web Deploy requires Server Management Objects version 10 or higher.

Resolution

The SQL provider can't run because of a missing dependency. Make sure that Microsoft SQL Server Management Objects (Version 10 or higher) is installed.

ERROR_OBJECT_TO_BE_DELETED_DOES_NOT_EXIST

Diagnosis

Web Deploy originally found an object to be deleted but when it tried to delete it, the object was missing.

Resolution

Make sure there are no other external processes that are modifying the target while performing a sync.

ERROR_APPPOOL_VERSION_MISMATCH

Diagnosis

The source application pool version is different from the destination application pool version.

Resolution

You can manually change the application pool versions to match between the source and destination, or use the apppoolnetfx provider to do it automatically.

ERROR_CENTRAL_CERT_STORE_SETTINGS_CANNOT_BE_READ

Diagnosis

The central certificate store can't be used in your current configuration.

Resolution

You need to make sure that you're using IIS 8 or later. If you're running msdeploy.exe on a 64-bit server, make sure that you're using the 64-bit version of the executable.

ERROR_CENTRAL_CERT_STORE_NOT_CONFIGURED_PROPERLY

Diagnosis

The Centralized SSL Certificate Store is either not installed or set up properly. This feature is also not supported on IIS 7.5 or earlier.

Resolution

Verify that the server you're syncing to or from is running IIS 8 or later. Also verify that the Centralized SSL Certificate Store is installed and configured on that server.

ERROR_MISSING_REQUIRED_DEPENDENCIES

Diagnosis

The AppHostAuthOverride provider requires IIS 7 or later.

Resolution

Make sure that the destination server you're modifying is running IIS 7 or later.

ERROR_COULD_NOT_CONNECT_TO_REMOTESVC

Diagnosis

Web Deploy can't connect to the remote service.

Resolution

Ensure that:

  • You can ping the remote machine.
  • The msdepsvc or wmsvc service is started on the remote server.
  • Your firewall is not blocking incoming connections of your ports on the destination. If you used the default installation, then it would be 80 for msdepsvc and 8172 for wmsvc.

ERROR_FRAMEWORK_VERSIONS_DO_NOT_MATCH

Diagnosis

The ERROR_FRAMEWORK_VERSIONS_DO_NOT_MATCH error can occur if you're doing a web server sync between two machines that have different versions of .NET installed.

Resolution

By default, Web Deploy prefers using the .NET version specified in its configuration file. If the version of .NET that Web Deploy is using on the client is different from the version on the server, a Web Server sync is blocked to prevent settings from different versions of .NET from being migrated. To resolve this problem, you have two options:

  1. Use the netFxVersion provider setting to inform Web Deploy exactly which .NET settings to migrate. Here is a command line example, which forces Web Deploy to sync .NET settings:

    msdeploy.exe -verb:sync -source:webserver,machineconfig32.netfxversion=2,machineconfig64.netfxversion=2,rootwebconfig32.netfxversion=2,rootwebconfig64.netfxversion=2 -dest:webserver,machineconfig32.netfxversion=2,machineconfig64.netfxversion=2,rootwebconfig32.netfxversion=2,rootwebconfig64.netfxversion=2,computername=destServername

  2. Run Web Deploy in the same version of .NET between client and server. On the client side, change the order of the supportedRuntime version element in the %programfiles%\IIS\Microsoft Web Deploy V3\msdeploy.exe.config file for the version of .NET that's specified first (see gacInstall provider for an example). This indicates the version of .NET, assuming it's installed on your system. On the server side, you can do the same for %programfiles%\IIS\microsoft web deploy\msdepsvc.exe.config. If you modify this file, make sure to restart the Web Deployment Agent Services that is the net stop msdepsvc and net start msdepsvc.

ERROR_HTTPCERT_BINDING_NOT_FOUND

Diagnosis

The specified binding couldn't be found.

Resolution

Run netsh http show sslcert from the command line to verify that the specified binding exists. If it's not found, then you may need to recreate it through IIS Manager.

ERROR_INCORRECT_PARAMETER_TAG

Diagnosis

An incorrect parameter tag was passed.

Resolution

Re-run Microsoft Deploy with the SQL, SQLCE, or MYSQL tag.

ERROR_INVALID_PATH

Diagnosis

The provider path is invalid.

Resolution

The path for your provider may differ depending on the provider you use. See Web Deploy Providers to know more about the provider you're using.

ERROR_INVALID_SETTING_SPECIFIED

Diagnosis

The provider setting specified is invalid.

Resolution

See Web Deploy Providers to know more about the provider you're using.

ERROR_INVALID_SETTING_VALUE_SPECIFIED

Diagnosis

The provider setting value is invalid.

Resolution

See Web Deploy Providers to know more about the provider you're using.

ERROR_SNI_BINDINGS_NOT_SUPPORTED

Diagnosis

SNI Bindings are only supported on IIS 8 or later.

Resolution

SNI Bindings can only be created on IIS 8 or later.

ERROR_FAILED_TO_RESTORE_BACKUP

Diagnosis

Web Deploy was unable to restore a backup.

Resolution

Verify the following points:

  • The backup specified exists on the server.
  • If there is a database within the backup, a connection string is specified in the connection string provider setting.

ERROR_BACKUPS_ARE_NOT_CONFIGURED_PROPERLY

Diagnosis

The backup feature isn't configured properly on the destination server.

Resolution

Check the event logs for hints on which settings are misconfigured. Validate that the settings stored in the applicationHost.config file conform to the IIS schema file BackupManagerSchema.xml.

ERROR_CANNOT_CREATE_BACKUP

Diagnosis

Web Deploy failed to create a new backup on the destination server.

Resolution

Verify that:

  • If you're doing an appHostConfig provider sync, make sure that the path for the provider isn't empty.
  • If there are multiple providers in a manifest that uses virtual paths, make sure that all paths point to the same application.
  • If you're performing a manual backup, make sure that the feature is turned ON in the server backup settings.
  • Check the server event logs if the error message returned to the client doesn't contain the required information.

ERROR_SETTING_IS_READ_ONLY

Diagnosis

The backup setting that you're trying to set is marked as read only and can't be set.

Resolution

The server administrator needs to mark the backup setting as "settable" in the applicationHost.config file by either manually updating the file, or by using Web Deploy's PowerShell scripts.

ERROR_FILE_IN_USE

Diagnosis

A destination file can't be overwritten or deleted because it is currently in use.

Resolution

Make sure that the destination file isn't in use before performing a sync. If you're syncing content to a web site hosted on IIS 7 or later (using the appHostConfig, iisApp, or contentPath providers), consider taking the application offline during the sync by enabling the appOffline rule.

You can configure the appOffline rule in the publishing profile (.pubxml). Add the EnableMSDeployAppOffline element to the PropertyGroup like this:

<PropertyGroup>
  <EnableMSDeployAppOffline>true</EnableMSDeployAppOffline>
</PropertyGroup>

ERROR_FAILED_TO_BRING_APP_ONLINE

Diagnosis

Web Deploy wasn't able to remove the app_offline.htm file from the site after the sync has completed.

Resolution

You may either rerun the sync with the appOffline rule enabled, or manually delete the app_offline.htm file from the root of your site on the destination server. For details on the reason for the failure, check the server event logs.

You can configure the appOffline rule in the publishing profile (.pubxml). Add the EnableMSDeployAppOffline element to the PropertyGroup like this:

<PropertyGroup>
  <EnableMSDeployAppOffline>true</EnableMSDeployAppOffline>
</PropertyGroup>

ERROR_HIGHER_FXVERSION_REQUIRED

Diagnosis

Web Deploy failed to perform a sync using SQL Dedicated Administrator Connection (DAC) because SQL DAC requires .NET 4.0.

Resolution

Ensure that the server making the SQL connection using DAC has .NET 4.0 installed. If you're connecting using the msdeploy.exe client, ensure that it has .NET 4.0 listed as its first option in the msdeploy.exe config file. If you're connecting to the msdepsvc server endpoint (Web Deployment Agent service), ensure that it has .NET 4.0 listed as its first option in the msdepsvc.exe config file.

ERROR_MAX_NUM_APPLICATIONS_EXCEEDED

Diagnosis

You have created more web applications than allowed on the target server.

Resolution

Request more applications from your server administrator or delete some of your existing applications.

ERROR_API_NOT_SUPPORTED

Diagnosis

The API being called doesn't exist on the target server because the server is using an earlier version of Web Deploy.

Resolution

Install the latest version of Web Deploy on the server.

DacFxNeededForSQLProvider, ERROR_SCRIPTDOM_NEEDED_FOR_SQL_PROVIDER, ERROR_SQLCLRTYPES_NEEDED_FOR_SQL_PROVIDER

The group of three errors share the following diagnosis and resolution:

Diagnosis

SQL DAC and its dependencies aren't installed.

Resolution

Use Web Platform Installer to install:

  • Microsoft SQL Server 2012 Data-Tier Application Framework
  • SQL Server 2012 Transact-SQL ScriptDom
  • SQL Server System CLR Types 11.0

ERROR_PACKAGE_TOO_LARGE

Diagnosis

The package or backup being created exceeds the maximum size of 4 GB.

Resolution

Use the archiveDir provider when creating a package instead. Now, there is no solution for this limit with respect to automatic backups.

ERROR_TIMED_OUT

Diagnosis

MySqlDump took too long to respond to a given query.

Resolution

You can change how long Web Deploy waits for MySqlDump to return from a query by changing the value of the WaitAttemptsSettingInfo and WaitIntervalSettingInfo provider settings.

ERROR_ASSEMBLY_NOT_FOUND

Diagnosis

Required dependencies couldn't be loaded.

Resolution

If you installed Web Deploy manually through the MSI, try reinstalling Web Deploy using Web Platform Installer, which helps to install required dependencies for you.

ERROR_SMO_NEEDED_FOR_SQL_PROVIDER, ERROR_USER_NOT_AUTHORIZED_FOR_IISAPP, ERROR_SCRIPTER_NEEDED_FOR_SQLCE_PROVIDER

The error codes ERROR_SMO_NEEDED_FOR_SQL_PROVIDER, ERROR_USER_NOT_AUTHORIZED_FOR_IISAPP, and ERROR_SCRIPTER_NEEDED_FOR_SQLCE_PROVIDER codes share the following diagnosis and resolution:

Diagnosis

SQL Shared Management Objects (SMO) wasn't found or the installed version is too old.

Resolution

Install the latest version of SMO using Web Platform Installer.

ERROR_CANNOT_CONNECT_TO_DATABASE

Diagnosis

This error occurs because a connection couldn't be made to a database.

Resolution

Verify that:

  • Your connection string is correct.
  • The account specified in the connection string has access to the database.
  • The database server you are connecting to allows remote connections.
  • The database server can be accessed from the machine running Web Deploy. If you are connecting to a remote Web Deploy server and specified a database, then you need to make sure that the remote Web Deploy server has access to your database.

ERROR_DACPAC_EXTRACTION_TIMEDOUT

Diagnosis

The DAC PAC action took too long to complete.

Resolution

Increase the amount of time that Web Deploy waits for a command to complete by specifying the CommandTimeout provider setting.

ERROR_NOT_SUPPORTED

Diagnosis

Azure Websites doesn't support creating new virtual applications or modifying existing application configuration on the server during a Web Deploy publish operation.

Resolution

You can create new virtual applications or modify existing configuration settings for your website through the Azure portal (https://portal.azure.com/). To do this,

  1. Log in to the portal.
  2. Open your site settings.
  3. Select the Configure tab.
  4. In the Configure tab, modify your site to match the configuration settings of the application you're trying to deploy. In most cases, this is simply a matter of changing the .NET Framework version, but in some cases this may also require you to add a new virtual application.

ERROR_EXCEPTION_WHILE_CREATING_OBJECT

Typically, this indicates an issue with validating the providers on the source. For instance, if you're trying to sync content from a source file share and you don't have access to the file share, you may see this error code. For such issues, ensure that you have access to all of the source data you would like to publish from.

ERROR_EXECUTING_METHOD

A generic error code to indicate that there was a problem publishing a database. Typically the stack trace and message associated with this code should indicate the actual error being thrown by either SQL Management Objects or SQL Data-Tier Application Framework.