Postupy: Ověření a sloučení printticketů
schématu tisku systému Microsoft Windows
Typická posloupnost úloh pro aplikaci, která podporuje tisk, by byla následující.
Určete možnosti tiskárny.
Nakonfigurujte PrintTicket, aby tyto schopnosti používal.
Ověřte PrintTicket.
V tomto článku se dozvíte, jak to udělat.
Příklad
V následujícím jednoduchém příkladu nás zajímá jenom to, jestli tiskárna podporuje oboustranný tisk. Hlavní kroky jsou následující.
Získejte objekt PrintCapabilities metodou GetPrintCapabilities.
Otestujte přítomnost požadované schopnosti. V následujícím příkladu otestujeme vlastnost DuplexingCapability objektu PrintCapabilities pro přítomnost možnosti tisku na obou stranách listu papíru s "otáčením stránky" podél dlouhé strany listu. Jelikož DuplexingCapability je kolekce, používáme metodu
Containsz ReadOnlyCollection<T>.Poznámka
Tento krok není nezbytně nutný. Metoda MergeAndValidatePrintTicket použitá níže zkontroluje jednotlivé požadavky v PrintTicket s možnostmi tiskárny. Pokud požadovaná funkce není tiskárnou podporovaná, ovladač tiskárny nahradí alternativní požadavek v PrintTicket vrácenou metodou.
Pokud tiskárna podporuje duplexní tisk, vzorový kód vytvoří PrintTicket, který požádá o oboustranný tisk. Aplikace však neurčovala všechna možná nastavení tiskárny, která je k dispozici v PrintTicket prvku. To by bylo plýtvání programátorem i programovým časem. Místo toho kód nastaví pouze duplexní požadavek a pak tento PrintTicket sloučí s existující, plně nakonfigurovanou a ověřenou, PrintTicket, v tomto případě výchozí PrintTicketuživatele .
Proto ukázka volá metodu MergeAndValidatePrintTicket pro sloučení nového, minimálního PrintTicket s výchozími PrintTicketuživatele . Vrátí ValidationResult, který obsahuje nový PrintTicket jako jednu ze svých vlastností.
Ukázka pak testuje, zda nové požadavky PrintTicket vyžadují duplexní provoz. Pokud ano, vzor se stane novým výchozím tiskovým tiketem pro uživatele. Pokud by byl výše uvedený krok 2 vynechán a tiskárna nepodporovala duplexní tisk podél dlouhé strany, byl by výsledkem testu
false. (Viz výše uvedená poznámka.)Posledním významným krokem je zavedení změny do vlastnosti UserPrintTicket objektu PrintQueue pomocí metody Commit.
/// <summary>
/// Changes the user-default PrintTicket setting of the specified print queue.
/// </summary>
/// <param name="queue">the printer whose user-default PrintTicket setting needs to be changed</param>
static private void ChangePrintTicketSetting(PrintQueue queue)
{
//
// Obtain the printer's PrintCapabilities so we can determine whether or not
// duplexing printing is supported by the printer.
//
PrintCapabilities printcap = queue.GetPrintCapabilities();
//
// The printer's duplexing capability is returned as a read-only collection of duplexing options
// that can be supported by the printer. If the collection returned contains the duplexing
// option we want to set, it means the duplexing option we want to set is supported by the printer,
// so we can make the user-default PrintTicket setting change.
//
if (printcap.DuplexingCapability.Contains(Duplexing.TwoSidedLongEdge))
{
//
// To change the user-default PrintTicket, we can first create a delta PrintTicket with
// the new duplexing setting.
//
PrintTicket deltaTicket = new PrintTicket();
deltaTicket.Duplexing = Duplexing.TwoSidedLongEdge;
//
// Then merge the delta PrintTicket onto the printer's current user-default PrintTicket,
// and validate the merged PrintTicket to get the new PrintTicket we want to set as the
// printer's new user-default PrintTicket.
//
ValidationResult result = queue.MergeAndValidatePrintTicket(queue.UserPrintTicket, deltaTicket);
//
// The duplexing option we want to set could be constrained by other PrintTicket settings
// or device settings. We can check the validated merged PrintTicket to see whether the
// the validation process has kept the duplexing option we want to set unchanged.
//
if (result.ValidatedPrintTicket.Duplexing == Duplexing.TwoSidedLongEdge)
{
//
// Set the printer's user-default PrintTicket and commit the set operation.
//
queue.UserPrintTicket = result.ValidatedPrintTicket;
queue.Commit();
Console.WriteLine("PrintTicket new duplexing setting is set on '{0}'.", queue.FullName);
}
else
{
//
// The duplexing option we want to set has been changed by the validation process
// when it was resolving setting constraints.
//
Console.WriteLine("PrintTicket new duplexing setting is constrained on '{0}'.", queue.FullName);
}
}
else
{
//
// If the printer doesn't support the duplexing option we want to set, skip it.
//
Console.WriteLine("PrintTicket new duplexing setting is not supported on '{0}'.", queue.FullName);
}
}
''' <summary>
''' Changes the user-default PrintTicket setting of the specified print queue.
''' </summary>
''' <param name="queue">the printer whose user-default PrintTicket setting needs to be changed</param>
Private Shared Sub ChangePrintTicketSetting(ByVal queue As PrintQueue)
'
' Obtain the printer's PrintCapabilities so we can determine whether or not
' duplexing printing is supported by the printer.
'
Dim printcap As PrintCapabilities = queue.GetPrintCapabilities()
'
' The printer's duplexing capability is returned as a read-only collection of duplexing options
' that can be supported by the printer. If the collection returned contains the duplexing
' option we want to set, it means the duplexing option we want to set is supported by the printer,
' so we can make the user-default PrintTicket setting change.
'
If printcap.DuplexingCapability.Contains(Duplexing.TwoSidedLongEdge) Then
'
' To change the user-default PrintTicket, we can first create a delta PrintTicket with
' the new duplexing setting.
'
Dim deltaTicket As New PrintTicket()
deltaTicket.Duplexing = Duplexing.TwoSidedLongEdge
'
' Then merge the delta PrintTicket onto the printer's current user-default PrintTicket,
' and validate the merged PrintTicket to get the new PrintTicket we want to set as the
' printer's new user-default PrintTicket.
'
Dim result As ValidationResult = queue.MergeAndValidatePrintTicket(queue.UserPrintTicket, deltaTicket)
'
' The duplexing option we want to set could be constrained by other PrintTicket settings
' or device settings. We can check the validated merged PrintTicket to see whether the
' the validation process has kept the duplexing option we want to set unchanged.
'
If result.ValidatedPrintTicket.Duplexing = Duplexing.TwoSidedLongEdge Then
'
' Set the printer's user-default PrintTicket and commit the set operation.
'
queue.UserPrintTicket = result.ValidatedPrintTicket
queue.Commit()
Console.WriteLine("PrintTicket new duplexing setting is set on '{0}'.", queue.FullName)
Else
'
' The duplexing option we want to set has been changed by the validation process
' when it was resolving setting constraints.
'
Console.WriteLine("PrintTicket new duplexing setting is constrained on '{0}'.", queue.FullName)
End If
Else
'
' If the printer doesn't support the duplexing option we want to set, skip it.
'
Console.WriteLine("PrintTicket new duplexing setting is not supported on '{0}'.", queue.FullName)
End If
End Sub
Aby bylo možné tento příklad rychle otestovat, zobrazí se zbývající část tohoto příkladu níže. Vytvořte projekt a obor názvů a vložte oba fragmenty kódu v tomto článku do bloku oboru názvů.
/// <summary>
/// Displays the correct command line syntax to run this sample program.
/// </summary>
static private void DisplayUsage()
{
Console.WriteLine();
Console.WriteLine("Usage #1: printticket.exe -l \"<printer_name>\"");
Console.WriteLine(" Run program on the specified local printer");
Console.WriteLine();
Console.WriteLine(" Quotation marks may be omitted if there are no spaces in printer_name.");
Console.WriteLine();
Console.WriteLine("Usage #2: printticket.exe -r \"\\\\<server_name>\\<printer_name>\"");
Console.WriteLine(" Run program on the specified network printer");
Console.WriteLine();
Console.WriteLine(" Quotation marks may be omitted if there are no spaces in server_name or printer_name.");
Console.WriteLine();
Console.WriteLine("Usage #3: printticket.exe -a");
Console.WriteLine(" Run program on all installed printers");
Console.WriteLine();
}
[STAThread]
static public void Main(string[] args)
{
try
{
if ((args.Length == 1) && (args[0] == "-a"))
{
//
// Change PrintTicket setting for all local and network printer connections.
//
LocalPrintServer server = new LocalPrintServer();
EnumeratedPrintQueueTypes[] queue_types = {EnumeratedPrintQueueTypes.Local,
EnumeratedPrintQueueTypes.Connections};
//
// Enumerate through all the printers.
//
foreach (PrintQueue queue in server.GetPrintQueues(queue_types))
{
//
// Change the PrintTicket setting queue by queue.
//
ChangePrintTicketSetting(queue);
}
}//end if -a
else if ((args.Length == 2) && (args[0] == "-l"))
{
//
// Change PrintTicket setting only for the specified local printer.
//
LocalPrintServer server = new LocalPrintServer();
PrintQueue queue = new PrintQueue(server, args[1]);
ChangePrintTicketSetting(queue);
}//end if -l
else if ((args.Length == 2) && (args[0] == "-r"))
{
//
// Change PrintTicket setting only for the specified remote printer.
//
String serverName = args[1].Remove(args[1].LastIndexOf(@"\"));
String printerName = args[1].Remove(0, args[1].LastIndexOf(@"\")+1);
PrintServer ps = new PrintServer(serverName);
PrintQueue queue = new PrintQueue(ps, printerName);
ChangePrintTicketSetting(queue);
}//end if -r
else
{
//
// Unrecognized command line.
// Show user the correct command line syntax to run this sample program.
//
DisplayUsage();
}
}
catch (Exception e)
{
Console.WriteLine(e.Message);
Console.WriteLine(e.StackTrace);
//
// Show inner exception information if it's provided.
//
if (e.InnerException != null)
{
Console.WriteLine("--- Inner Exception ---");
Console.WriteLine(e.InnerException.Message);
Console.WriteLine(e.InnerException.StackTrace);
}
}
finally
{
Console.WriteLine("Press Return to continue...");
Console.ReadLine();
}
}//end Main
''' <summary>
''' Displays the correct command line syntax to run this sample program.
''' </summary>
Private Shared Sub DisplayUsage()
Console.WriteLine()
Console.WriteLine("Usage #1: printticket.exe -l ""<printer_name>""")
Console.WriteLine(" Run program on the specified local printer")
Console.WriteLine()
Console.WriteLine(" Quotation marks may be omitted if there are no spaces in printer_name.")
Console.WriteLine()
Console.WriteLine("Usage #2: printticket.exe -r ""\\<server_name>\<printer_name>""")
Console.WriteLine(" Run program on the specified network printer")
Console.WriteLine()
Console.WriteLine(" Quotation marks may be omitted if there are no spaces in server_name or printer_name.")
Console.WriteLine()
Console.WriteLine("Usage #3: printticket.exe -a")
Console.WriteLine(" Run program on all installed printers")
Console.WriteLine()
End Sub
<STAThread>
Public Shared Sub Main(ByVal args() As String)
Try
If (args.Length = 1) AndAlso (args(0) = "-a") Then
'
' Change PrintTicket setting for all local and network printer connections.
'
Dim server As New LocalPrintServer()
Dim queue_types() As EnumeratedPrintQueueTypes = {EnumeratedPrintQueueTypes.Local, EnumeratedPrintQueueTypes.Connections}
'
' Enumerate through all the printers.
'
For Each queue As PrintQueue In server.GetPrintQueues(queue_types)
'
' Change the PrintTicket setting queue by queue.
'
ChangePrintTicketSetting(queue)
Next queue 'end if -a
ElseIf (args.Length = 2) AndAlso (args(0) = "-l") Then
'
' Change PrintTicket setting only for the specified local printer.
'
Dim server As New LocalPrintServer()
Dim queue As New PrintQueue(server, args(1))
ChangePrintTicketSetting(queue) 'end if -l
ElseIf (args.Length = 2) AndAlso (args(0) = "-r") Then
'
' Change PrintTicket setting only for the specified remote printer.
'
Dim serverName As String = args(1).Remove(args(1).LastIndexOf("\"))
Dim printerName As String = args(1).Remove(0, args(1).LastIndexOf("\")+1)
Dim ps As New PrintServer(serverName)
Dim queue As New PrintQueue(ps, printerName)
ChangePrintTicketSetting(queue) 'end if -r
Else
'
' Unrecognized command line.
' Show user the correct command line syntax to run this sample program.
'
DisplayUsage()
End If
Catch e As Exception
Console.WriteLine(e.Message)
Console.WriteLine(e.StackTrace)
'
' Show inner exception information if it's provided.
'
If e.InnerException IsNot Nothing Then
Console.WriteLine("--- Inner Exception ---")
Console.WriteLine(e.InnerException.Message)
Console.WriteLine(e.InnerException.StackTrace)
End If
Finally
Console.WriteLine("Press Return to continue...")
Console.ReadLine()
End Try
End Sub
Viz také
- PrintCapabilities
- PrintTicket
- GetPrintQueues
- PrintServer
- EnumeratedPrintQueueTypes
- PrintQueue
- GetPrintCapabilities
- dokumenty ve WPF
- Přehled tisku
- Schéma tisku
Spolupracujte s námi na GitHubu
Zdroj tohoto obsahu najdete na GitHubu, kde můžete také vytvářet a kontrolovat problémy a žádosti o přijetí změn. Další informace najdete v našem průvodci pro přispěvatele.
.NET Desktop feedback